AOpen BIOSアップデート

File Name: w4bg2109.zip
File Size: 470KB

Version: R1.09

Description:
・Checksum: 0400
・Changed default setting of "USB Keyboard Support" from "Enable" to "Auto"
・Changed Default setting of "DRAM Timing Selectable" from "Manual" to "By SPD"

OS Support: Win2000,Win95,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 4bg2109.zip
File Size: 228KB

Version: R1.09

Description:
・Checksum: 0400
・Changed default setting of "USB Keyboard Support" from "Enable" to "Auto"
・Changed Default setting of "DRAM Timing Selectable" from "Manual" to "By SPD"

OS Support: DOS

File Name: w4cm110.ZIP
File Size: 562KB

Version: R1.10

Description:
・Checksum: D752H
・Modified Promise firmware default setting. When 378 chip detects HDD(s), RAID mode default setting is set to Stripe and HDD(s) use in array default is set to one. .
・Modified "INS to enter Open Jukebox" string to "INS to enter Jukebox Media Center" in post screen.
・Modified Promise 378 chip firmware , IDE3 can set Mirror RAID mode.
・Swapped Post Screen CPU/DRAM/AGP/PCI Voltage and Clock Speed location,and modified "Current" string to "Setting" string.
・Supports New BBS_Support,have added "Removable Device Priority","Hard Disk Boot Priority","CD-ROM Boot Priority" in "Advance Bios Feature".
・Change DDR Voltage Setting to "AUTO".

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 4cm110.ZIP
File Size: 353KB

Version: R1.10

Description:
・Checksum: D752H
・Modified Promise firmware default setting. When 378 chip detects HDD(s), RAID mode default setting is set to Stripe and HDD(s) use in array default is set to one. .
・Modified "INS to enter Open Jukebox" string to "INS to enter Jukebox Media Center" in post screen.
・Modified Promise 378 chip firmware , IDE3 can set Mirror RAID mode.
・Swapped Post Screen CPU/DRAM/AGP/PCI Voltage and Clock Speed location,and modified "Current" string to "Setting" string.
・Supports New BBS_Support,have added "Removable Device Priority","Hard Disk Boot Priority","CD-ROM Boot Priority" in "Advance Bios Feature".
・Change DDR Voltage Setting to "AUTO".

OS Support: DOS

File Name: cm2101g.ZIP
File Size: 353KB

Version: R1.01g for DOS Beta

Description:
・This is beta version for DOS

OS Support: DOS

File Name: wgetb107.zip
File Size: 567KB

Version: R1.07

Description:
・CheckSum: D700
・Changed "USB Keyboard Support" functin default setting from "Enable" to "Auto"
・Modified Default setting of "DRAM Timing Selectable" from "Manual" to "By SPD"
・Changed DDR Voltage Setting to "AUTO".

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: getb107.zip
File Size: 321KB

Version: R1.07

Description:
・CheckSum: D700
・Changed "USB Keyboard Support" functin default setting from "Enable" to "Auto"
・Modified Default setting of "DRAM Timing Selectable" from "Manual" to "By SPD"
・Changed DDR Voltage Setting to "AUTO".

OS Support: DOS

File Name: wpetb106.zip
File Size: 537KB

Version: R1.06

Description:
・CheckSum:9200
・Changed the default setting of "USB Keyboard Support" from "Enable" to "Auto"
・Changed Default Value of "DRAM Timing Selectable" from "Manual" to "By SPD"
・Changed DDR Voltage Setting to "AUTO".

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: wasgn101a.ZIP
File Size: 557KB

Version: R1.01a Beta

Description:
・This is Beta BIOS
・Fixed "Can't display correctly information of Memory when adjusting Memory setting in BIOS".

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: w4spe104.zip
File Size: 434KB

Version: R1.04

Description:
・Checksum: 345Dh
・Fixed Pioneer DVD-R/-RW set as Master device, Win98SE/ME S3 resume fail
・Modifide DDR Voltage Setting using "Auto" in first POST screen
・Fixed USB CDROM Booting hang up when the audio CD disc in the drive

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 4spe104.zip
File Size: 236KB

Version: R1.04

Description:
・Checksum: 345Dh
・Fixed Pioneer DVD-R/-RW set as Master device, Win98SE/ME S3 resume fail
・Modifide DDR Voltage Setting using "Auto" in first POST screen
・Fixed USB CDROM Booting hang up when the audio CD disc in the drive

OS Support: DOS

File Name: w4speg100.zip
File Size: 429KB

Version: R1.00

Description:
・CheckSum: F924h
・Initial Release

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 4speg100.zip
File Size: 232KB

Version: R1.00

Description:
・CheckSum: F924h
・Initial Release

OS Support: DOS

File Name: w4spen104.zip
File Size: 434KB

Version: R1.04

Description:
・Checksum: 8500h
・Fixed Pioneer DVD-R/-RW setting as Master device, Win98SE/ME S3 resume fail
・Changed DDR Voltage Setting to "Auto" in POST screen

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 4spen104.zip
File Size: 236KB

Version: R1.04

Description:
・Checksum: 8500h
・Fixed Pioneer DVD-R/-RW setting as Master device, Win98SE/ME S3 resume fail
・Changed DDR Voltage Setting to "Auto" in POST screen

OS Support: DOS

File Name: w4spg100.zip
File Size: 429KB

Version: R1.00

Description:
・CheckSum: 7DE2h
・Initial Release

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 4spg100.zip
File Size: 232KB

Version: R1.00

Description:
・CheckSum: 7DE2h
・Initial Release

OS Support: DOS

File Name: w4spn104.zip
File Size: 433KB

Version: R1.04

Description:
・Checksum: 2231h
・Fixed Pioneer DVD-R/-RW settinga as Master device , Win98SE/ME S3 resume fail
・Changed DDR Voltage Setting to "Auto" in the POST screen

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 4spn104.zip
File Size: 236KB

Version: R1.04

Description:
・Checksum: 2231h
・Fixed Pioneer DVD-R/-RW settinga as Master device , Win98SE/ME S3 resume fail
・Changed DDR Voltage Setting to "Auto" in the POST screen

OS Support: DOS

File Name: W46u113.ZIP
File Size: 464KB

Version: R1.13

Description:
・Checksum EC97h
・Supports CPU Ratio up to 26.

OS Support: Win2000,Win95,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 46u113.ZIP
File Size: 241KB

Version: R1.13

Description:
・Checksum EC97h
・Supports CPU Ratio up to 26.

OS Support: DOS

File Name: W46gn107.ZIP
File Size: 457KB

Version: R1.07

Description:
・CheckSum: 6077h
・Supports CPU Ratio up to 26.

OS Support: Win2000,Win95,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 46gn107.ZIP
File Size: 251KB

Version: R1.07

Description:
・CheckSum: 6077h
・Supports CPU Ratio up to 26.

OS Support: DOS

File Name: wmx4ge105.zip
File Size: 478KB

Version: R1.05

Description:
Patch A-DADA DIMM issue

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: mx4ge105.zip
File Size: 278KB

Version: R1.05

Description:
Patch A-DADA DIMM issue

OS Support: DOS

File Name: Wmvr113.ZIP
File Size: 569KB

Version: R1.13

Description:
・Checksum 4B71h
・Fixed Watchdog issue ( when using DDR 333)
・Changed "USB keyboard Support" default setting to "AUTO".
・Fixed "AC97 Modem" item help string display abnormal.
・Supports DDR333.

OS Support: Win2000,Win95,Win98,Win98SE,WinME,WinNT,WinXP

File Name: mvr113.ZIP
File Size: 340KB

Version: R1.13

Description:
・Checksum 4B71h
・Fixed Watchdog issue ( when using DDR 333)
・Changed "USB keyboard Support" default setting to "AUTO".
・Fixed "AC97 Modem" item help string display abnormal.
・Supports DDR333.

OS Support: DOS

File Name: mx4sgnl101.zip
File Size: 305KB

Version: R1.01

Description:
・CHECKSUM: FF01h
・Upgraded VGA BIOS to 2972
・Supports 865G GMCH BIOS 1.3 Spec.
・Fixed Smart fan enable then cause abnormal temperature.

OS Support: DOS

File Name: m3t111a.ZIP
File Size: 343KB

Version: R1.11a Beta

Description:
・This is Beta BIOS
・Fixed the problem "Unable to enter Windows when USB card reader is connected"

OS Support: DOS,Linux,Netware,Win.NET(32bit),Win.NET(64bit),Win2000,Win3.1,Win95,Win98,Win98SE,WinME,WinNT,WinXP

File Name: wf4n104.ZIP
File Size: 443KB

Version: R1.04

Description:
・Checksum 9AF8H
・Modified check CPUID 0.13um or 0.18um
・Changed AGP_PCI_N_Table from 04h to 7Ch

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: f4n104.ZIP
File Size: 220KB

Version: R1.04

Description:
・Checksum 9AF8H
・Modified check CPUID 0.13um or 0.18um
・Changed AGP_PCI_N_Table from 04h to 7Ch

OS Support: DOS

File Name: f4n104a.ZIP
File Size: 183KB

Version: R1.04a Beta

Description:
・This is Beta BIOS

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: wk76n103.ZIP
File Size: 447KB

Version: R1.03

Description:
・Checksum:2B12H
・Fixed KingsTon DDR400 DIMM detected error
・Fixed Audio Codec can't be disabled

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: k76n103.ZIP
File Size: 241KB

Version: R1.03

Description:
・Checksum:2B12H
・Fixed KingsTon DDR400 DIMM detected error
・Fixed Audio Codec can't be disabled

OS Support: DOS

File Name: w8xn114a.ZIP
File Size: 465KB

Version: R1.14a Beta

Description:
・This is Beta BIOS
・Supports System password in BIOS

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 8xn114a.ZIP
File Size: 258KB

Version: R1.14a Beta

Description:
・This is Beta BIOS
・Supports System password in BIOS

OS Support: DOS

File Name: Wa9d104.ZIP
File Size: 520KB

Version: R1.04

Description:
・CheckSum: 24DEH
・Fixed some DDR unstable issue. (i.e. A-DATA DDR400)
・Update Nvidia BPL from 3.00 to 3.10.
・Fixed system can't detect USB2.0 device after rebooting
・Added FSB 200Mhz CPU support DDR frequency by SPD.
・Changed USB Keyboard Support from "Enable" to "Auto".
・Changed "Wake On PCI Card item" and "Wake On RTC Timer item" item value from " By BIOS/By OS" to "Enabled/Disable".
・Fixed coding error when USB 1.1 disable need to disable USB 2.0 control.
・Fixed some DDR SPD in channel B detected error.
・Fixed WinXP motherboard resource yellow mark if doesn't plug PS2 KB while installing OS.
・Changed Year Start from 1999 to 2003.
・Fixed ATXP1 funtion fail (when CPU ratio over 13.0x).
・Fixed OBSD documentation error to cause MCP2/A4 failure to high.
・Swapped Post Screen CPU/DRAM/AGP/PCI Voltage and Clock Speed location,and modified "Current" string to "Setting" string.
・Improved save cmos times from 3sec to 0.4sec.

OS Support: Win2000,Win95,Win98,Win98SE,WinME,WinNT,WinXP

File Name: a9d104.ZIP
File Size: 293KB

Version: R1.04

Description:
・CheckSum: 24DEH
・Fixed some DDR unstable issue. (i.e. A-DATA DDR400)
・Update Nvidia BPL from 3.00 to 3.10.
・Fixed system can't detect USB2.0 device after rebooting
・Added FSB 200Mhz CPU support DDR frequency by SPD.
・Changed USB Keyboard Support from "Enable" to "Auto".
・Changed "Wake On PCI Card item" and "Wake On RTC Timer item" item value from " By BIOS/By OS" to "Enabled/Disable".
・Fixed coding error when USB 1.1 disable need to disable USB 2.0 control.
・Fixed some DDR SPD in channel B detected error.
・Fixed WinXP motherboard resource yellow mark if doesn't plug PS2 KB while installing OS.
・Changed Year Start from 1999 to 2003.
・Fixed ATXP1 funtion fail (when CPU ratio over 13.0x).
・Fixed OBSD documentation error to cause MCP2/A4 failure to high.
・Swapped Post Screen CPU/DRAM/AGP/PCI Voltage and Clock Speed location,and modified "Current" string to "Setting" string.
・Improved save cmos times from 3sec to 0.4sec.

OS Support: DOS

File Name: w79d4m103.zip
File Size: 536KB

Version: R1.03

Description:
・Checksum: A100h
・Added DDR default voltage setting at "AUTO".
・Updated BPL rom Ver 3.11 for B0721C8X.ROM

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 79d4m103.zip
File Size: 308KB

Version: R1.03

Description:
・Checksum: A100h
・Added DDR default voltage setting at "AUTO".
・Updated BPL rom Ver 3.11 for B0721C8X.ROM

OS Support: DOS

File Name: Wadn108.ZIP
File Size: 519KB

Version: R1.08

Description:
・Checksum:1122H
・Fixed A-DATA "MDOHY6F3H415B1EAZ DDR 400(3) 512*16" S3 resume fail.
・Fixed Chinese version BIOS issue
・Fixed case open function issue
・Remove C1 Disconnect and CPU THRM-Throttling item.
・Swapped Post Screen CPU/DRAM/AGP/PCI Voltage and Clock Speed location,and modified "Current" string to "Setting" string.
・Improved save cmos time from 3 sec to 0.4 sec.
・Changed DDR Voltage Setting to AUTO

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: adn108.ZIP
File Size: 292KB

Version: R1.08

Description:
・Checksum:1122H
・Fixed A-DATA "MDOHY6F3H415B1EAZ DDR 400(3) 512*16" S3 resume fail.
・Fixed Chinese version BIOS issue
・Fixed case open function issue
・Remove C1 Disconnect and CPU THRM-Throttling item.
・Swapped Post Screen CPU/DRAM/AGP/PCI Voltage and Clock Speed location,and modified "Current" string to "Setting" string.
・Improved save cmos time from 3 sec to 0.4 sec.
・Changed DDR Voltage Setting to AUTO

OS Support: DOS

File Name: wa79gm109.zip
File Size: 572KB

Version: R1.09

Description:
・Checksum: E400h
・Changed DDR voltage to "AUTO".
・Updated BPL rom Ver 3.09 for B0704C8X.ROM.

OS Support: Win2000,Win95,Win98,Win98SE,WinME,WinNT,WinXP

File Name: a79gm109.zip
File Size: 344KB

Version: R1.09

Description:
・Checksum: E400h
・Changed DDR voltage to "AUTO".
・Updated BPL rom Ver 3.09 for B0704C8X.ROM.

OS Support: DOS

File Name: w79gtb101.zip
File Size: 555KB

Version: R1.01

Description:
・CheckSum: 7cefh
・Changed DDR Votage default value to Auto.
・Added C1 Disconnect item.
・System will auto set FSB in safe mode when overclock too high.
・Fixed CPU voltage load default setting error issue.
・Updated VGA Rom From 4.1F.00.07.00 to 4.1F.00.08.00.
・Updated BPL ROM(2.97)
・Fixed user update bios and than it cann't enter Windows XP
・Supports DieHard bios function.

OS Support: Win2000,Win98,Win98SE,WinME,WinNT,WinXP

File Name: 79gtb101.zip
File Size: 329KB

Version: R1.01

Description:
・CheckSum: 7cefh
・Changed DDR Votage default value to Auto.
・Added C1 Disconnect item.
・System will auto set FSB in safe mode when overclock too high.
・Fixed CPU voltage load default setting error issue.
・Updated VGA Rom From 4.1F.00.07.00 to 4.1F.00.08.00.
・Updated BPL ROM(2.97)
・Fixed user update bios and than it cann't enter Windows XP
・Supports DieHard bios function.

OS Support: DOS

File Name: mk33r117.zip
File Size: 152KB

Version: R1.17

Description:
・Fixed 6511-UV Keyboard need wait 25s after resuming from S3 under Windows 2000.
・Fixed 6511-UV Keyboard can't work after resuming from S4 under Windows 2000.
・Fixed ACPI error under Event Viewer in WinXP

OS Support: DOS

AOpen URL:http://www.aopen.com/

AOpen
URL:http://www.aopen.com/