ABIT Computer
URL:http://www.abit.com.tw/

• 各データの著作権は、特別の断りがないかぎりそれぞれの開発メーカーに帰属します。
• 収録各社およびDOS/V POWER REPORT編集部では、アップデートによるいかなる損害に関しても一切責任を負いません。
• DOS/V POWER REPORT編集部では、アップデート方法などに関するお問い合わせには一切お答えしておりません。
• 収録内容が多いメーカーの場合、一覧の表示が中断してしまうことがあります。この場合、「更新」ボタンを押して再読み込みを行なってください。

収録フォルダを開きます。

説明を表示します。

新規収録されたBIOS

更新されたBIOS

ユーティリティ

BH7 / BH7-E

 BH7 Hardware Monitor V15  (2003/07/04)

DISC:¥BIOS¥ABIT¥HWM_BH7V15

説明の表示

File Name: hwm_bh7v15.exe

Description:
Hardware Monitor

Socket478 マザーボード

BD7-E

 BD7-E BIOS ID:10  (2003/06/17)

DISC:¥BIOS¥ABIT¥BD7-E

説明の表示

File Name: bd7e11.exe

ID: 11

Description:
1. Fixes the issue while S4 resumed, the MAC Address of onboard LAN
chip can not correctly display.
2. Adds the following settings for "CPU Shutdown Temperature".
.80C/176F
.85C/185F
.90C/194F
3. Changes the default setting of "CPU Warning Temperature".
4. Fixes the problem that if "Land Boot Rom" setup to Enable, it would
hang while resumed from S4 mode.
5. Revises the item help of "Shut down When CPU Fan Fail".
6. BIOS Compile Date: 6/17/2003.

BH7 / BH7-E

 BH7 / BH7-E BIOS ID:15  (2003/06/17)

DISC:¥BIOS¥ABIT¥BH7

説明の表示

File Name: bh715.exe

ID: 15

Description:
1. Revise CPU Temperature in "PC Health" page.
2. Fixes the problem if set up "Land Boot Rom" enabled, it would hang while
resumed from S4 mode.
3. Adds the item help of "Smart Fan Speed Control".
4. The Hardware Monitoring tool needs to be updated to"HWM_BH7V15.EXE"
together with BIOS update.
5. BIOS Compile Date: 6/17/2003.

IC7 / IC7-G

 IC7/ IC7-G BIOS ID:15  (2003/06/23)

DISC:¥BIOS¥ABIT¥IC7

説明の表示

File Name: ic715.exe

ID: 15

Description:
1. Shows the correct IRQ of IDE Controller in PCI Devices Listing.
2. Fixes CPU Thermal Throttling behavior while under minus temperature, and supports minus temperature reading in BIOS Setup.
3. Fixes the problem that system could not automatically get into S4 mode, after enabling Power Scheme of "power Option" under Windows XP.
4. Fixes wrong system operation caused by incomplete discharging CMOS data by CCMOS jumper.
5. BIOS Compile Date: 6/23/2003.

IS7 / IS7-G / IS7-E

 IS7 / IS7-G / IS7-E BIOS ID:13  (2003/06/10)

DISC:¥BIOS¥ABIT¥IS7

説明の表示

File Name: is7g13.exe

ID: 13

Description:
1. Added support for IS7-G, IS7, and IS7-E.
2. Updated CPU micro code (CPU: 0F29H, ID=11H).
3. Added CPU multiplier 8X for engineering sample CPU and maximum CPU frequency 412 MHz.
4. Revised setup menu for OnChip Serial ATA.
5. Fixed on-chip SATA boot issue while another bootable hard drives exist and attached to IDE-1 or IDE-2.
6. Updated memory reference code and ICH5 BIOS spec to v1.2.
7. Fixed PS/2 mouse malfunctioning problem while the USB cable of Media XP attached to mainboard.
8. Fixed DOS 6.22 booting failure from FAT16 partition.
9. Fixed BIOS hang-up problem which is caused by specific CPU cooling fan reporting error RPM to BIOS when CPU FanEQ 60% enabled.
10. Revised the following default settings in BIOS setup page. - Bootable Add-in Device: PCI Slot Device - CPU FanEQ Active Temperature: 70 C - CPU Warning Temperature: 85 C
11. Added 80, 85, and 90 degrees C into "Shutdown Temperature".
12. Enabled "IDE Block Mode" and hided the option.
13. Revised ICH5R RAID BIOS display issue.
14. Revised power-on delay time from 4‾5 seconds to 1‾2 seconds after AC power lost and resumed.
15. Added description for "Bootable Add-in Device".
16. Fixed the problem that NB fan still reports full speed in PC Health page when "CPU FanEQ Speed Control" is enabled.
17. Added new option "IDE Bus Master".
18. Added description for "Shutdown when CPUFAN Fail".
19. Revised the wording of IDE channels inside the BIOS Setup. IDE Channel 0, 1, 2, and 3 are changed to 1, 2, 3, and 4.
20. Added new option "SATA RAID ROM" to setup both "OnBoard SATA" and "OnChip SATA".
21. Added new option "HDD Change Message" in Advanced BIOS Features and the default setting is "Disabled". If this option is changed to "Enabled",the system will show warning message and prompt for a confirmation whenone or more than one HDD had been added into or removed from the system.
22. Fixed "CPU THRM-Throttling" function.
23. Added new options "Refresh Cycle Time", "Read Delay Adjust (tRD Adj)", and "Command Per Clock (CPC)".
24. Changed the default setting of "Drive A" from "None" to "1.44M" after Load Fail-safe Defaults.
25. Changed the default setting of "OnCip Serial ATA" to "Auto".
26. Added "Game Accelerator" technology.
27. Revised the error reading of fan speed for specific CPU cooling fan when FanEQ 60% enabled.
28. Fixed the slow detection problem when HDD simulation card installed.
29. Fixed the problem that SMARTDRV.EXE malfunction in DOS 6.22 environment.
30. Fixed the problem that Windows 98 bootable floppy disk causes system hang up during loading CD-ROM driver when "OnChip Serial ATA" is set to"Auto" or "Enhanced Mode".
31. Removed the option "Force Update ESCD".
32. BIOS Compile Date: 6/10/2003.

SocketA マザーボード

IS7-M

 IS7-M BIOS ID:10  (2003/06/25)

DISC:¥BIOS¥ABIT¥IS7-M

説明の表示

File Name: is7m10.exe

ID: 10

Description:
1. First release.
2. BIOS compile date: 6/25/2003.

NF7V2.0 / NF7-SV2.0

 NF7V2.0 / NF7-SV2.0 BIOS ID:16  (2003/06/25)

DISC:¥BIOS¥ABIT¥NF7V2

説明の表示

File Name: nf7d16.exe

ID: 16

Description:
1. For NF7 v2.0 motherboard, please update BIOS v1.6 in case the system intermittently hangs up at POST screen of PCI devices listing with BIOS v1.4 and earlier.
2. Please update the bios by following steps,
3. A. Format a floppy disk on another PC system in Windows.
4. B. Copy "AWDFLASH.EXE" and "NF7D_16.BIN" files onto the floppy disk.
5. C. Power on NF7 v2.0 system, insert the floppy disk into drive A, and press "Alt"+"F2" keys to update BIOS.
6. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23K is included in this BIOS package.
7. Fixes systems freezes in S-ATA BIOS initial while using display card on PCI slot.
8. Fixes the problem if FAN speeded too slow, system would hang at BIOS screen or at watching the status in PC health Status screen.
9. BIOS Compile Date: 6/25/2003.