USH1.1hWRÉt.%
*L/F1¡2«7≈CqF¬H≈X⌐^╟e▄miq s╢w╗yZÉ$                    C O N T E N T S$                    ───────────────6$          ╔═══════════════════════════════════════╗8$          ║ ╔═══════════════════════════════════════╗>$          ║ ║      How to Use the Data Bank         ║>$          ║ ║      The Data Bank Structure          ║>$          ║ ║	   Searching Information in Window     ║>$          ║ ║
     Print and Writing in File         ║>$          ║ ║  Writing Information on Envelope      ║>$          ║ ║          Using the "Mouse"            ║>$          ║ ║      Setting-up Configuration         ║>$          ╚═║  Switching Language and Keyboard      ║8$            ╚═══════════════════════════════════════╝W.                     Setting-up Configuration.                     ────────────────────────<       You can  change  the  configuration  of the Data Bank$ (Reference Guide) by selecting the:9$ -  required options in the Command Line Parameters,9 -  "Setup" ("Configuration") item of the "Service Menu".=       The selected configuration  may  be  used  during  the= current  run  only  (OPTIONS  THIS  RUN)  or  be  saved  for% subsequent runs (OPTIONS NEXT RUNS).=       To input changes via the configuration menu,  call the= "Service Menu" (the <F9> key)  and either choose the "Setup"%$ item or use the "hot key" <F7>.=       You may  set  the  video  display  mode,  screen  line= number, driver of the  display/keyboard,  and  the  starting
 language.     Display Mode Selection:   - Automatic
   - Color   - Black-White   - Monochrome=       If the default is set to "Automatic"  then the  system= chooses the optimal mode automatically. However, if you have= a  monochrome display adapter (MDA) or your operating system= has been set to black-white mode, then the color  mode  will= not  work.  In  this case, in order to get color video mode,= you  have  to  refer  to  your  DOS  (operationing   system)
 description.%     Number of Lines on Your Screen:
   - 25 lines   - 43/50 lines=      The default value is 25. However, if you have an EGA or= VGA adapter, then it is possible to  extend  the  number  of lines to 43 (EGA) or 5O(VGA).     Display/Keyboard Driver:   - Installable drivers   - External drivers=      The default  installable  driver  lets  you  work  with5 Russian language without loading an external driver.=      If your  display  adapter  is neither EGA nor VGA, then; the default installable driver switches off automatically.%     Selecting the Starting Language'     (for multilingual versions only):   - Current   - Russian   - English=     At the start of the program, the default language is the. same as when the last session was terminated.=     If you  want  to  start  the  Data  Bank  in  a specific= language,  choose it,  setting the appropriate option of the4 start language. Don't forget to execute the command "Options next runs".=     The required options  are marked by pressing the <Space> key.=     The selected options  are set with the help  of the menu' item of the screen "Options this run".=     The chosen  options  are  saved  using  the menu item of  the screen "Options next runs".=     It is necessary to notice  the distinction  at execution of these two items.=     The item  "Options this run"  is functioning only during= the present session and at  the next start of the  Data Base! the chosen option are not saved.=     The item  "Options next runs"  saves  the chosen options; at new starts as long as the options would not be changed.=     To return  the default configuration  exit the Data Base8$ and start it again with the help of the option /R.=     Use the  "Cancel"  item  to  exit  from the "Setup" menu without making any changes.,)                         Results` Editor)                         ───────────────=    With the  results` editor  you  may  correct the selected= information and write it  to the log file.  The Help Section<$ "Write Information in File" explains how to  edit  the= log file and transfer the temporary log file to  a permanent file.)                        Editing Commands)                        ────────────────      <>                 - up       <>                 - down(      <>                 - to the right'      <>                 - to the left(      <Ctrl-W>            - scrolling up*      <Ctrl-Z>            - scrolling down,      <PgDn>              - to the next page0      <PgUp>              - to the previous page0      <Home>              - to beginning of line*      <End>               - to end of line0      <Ctrl-PgUp>         - to beginning of text*      <Ctrl-PgDn>         - to end of text;      <Ctrl-Home>         - in the upper-left screen corner<      <Ctrl-End>          - in the upper-right screen corner1      <Ctrl- >           - one word to the right0      <Ctrl- >           - one word to the left)      <Enter>             - insert a line;      <Del>               - delete a character under cursor=      <BkSpace>           - delete a character left to cursor)      <Ctrl-Y>            - delete a line)      <Ctrl-T>            - delete a word=      <Ctrl-Q-Y>          - delete from cursor to end of line(      <Ctrl-Q-L>          - recover line9      <Insert>            - switch "Insert/Overtype" mode=      To write  the  temporary  log file to a permanent file,= use the item  "Write to  file",  adopt  the   proposed  name- "Report.TXT", or  give  your  own  filename.=      If you assign the file name "PRN" backed up in DOS, the6 result would be output to the printer (print answer).$                        Branch List$                        ───────────=     To get  the  index  of enterprises of a specific branch,= select the desired branch and press the <Enter> key, or  use= the  point "Enterprises  of  the Selected Branch".  You  can> view the product-oriented list by choosing firstly the branch= and  then executing the point "Products of Selected Branch". Refer also to the options:$ -   "Enterprises" and%$ -   "How to Use the Data Bank"._2       How to Use the Data Bank (Reference Guide)2       ──────────────────────────────────────────/     You see one or more windows on the screen:      ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄"      █                      ██"      █       Window         ██"      █                      ██!      █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄  ▄▄██        ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀,@  and menu items:     Previous screen  ▄*@                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀.                 Screen with Windows and Menu.                 ────────────────────────────-  To move to different windows or menu items:  -  using the mouse:=     - move the mouse cursor to the desired window and  click       the left mouse button.  -  without mouse:     - Ahead      -    <Tab>"     - Back       -    <Shift-Tab>  To select an item from menu:  -  using the mouse:;     - move  the mouse cursor to the desired item and press       the left mouse button.  -  without mouse:?     -  place the cursor at the required item and press <Enter>>     -  press <Alt-Highlighted letter> (the cursor may be any-*        where on the screen is this case).0                 Window with List of Data Items0                 ──────────────────────────────=     If a window contains a list of data items,  then you can  select a specific item:     1. Using the mouse:=     Move the mouse cursor to the required item and click the  left mouse button twice.!     2. Without mouse (method 1):      <>         -  Up,      <>         -  Down,      <>         -  Right,      <>         -  Left,      <PgDn>      -  Next page,#      <PgUp>      -  Previous page,'      <Home>      -  Beginning of list,!      <End>       -  End of list,$      <Ctrl-F>    -  Context search,0      <Ctrl-L>    -  æontinuation of the search,.   or type the word and press the <Enter> key.1$    (See 	"Searching Information in Window")..            Windows with Required Information.            ─────────────────────────────────7     When you see the contents of the window, use keys:      <>         -  Up,      <>         -  Down,      <>         -  Right,      <>         -  Left,      <PgDn>      -  Next page,#      <PgUp>      -  Previous page,+      <Home>      -  Beginning of the line,%      <End>       -  End of the line,'      <Ctrl-PgUp> -  Beginning of text,!      <Ctrl-PgDn> -  End of text,,      <Ctrl-Home> -  Top left of the screen,0      <Ctrl-End>  -  Bottom right of the screen,0      <Ctrl-K-B>  -  Setting beginning of block,*      <Ctrl-K-K>  -  Setting end of block,2      <Ctrl-K-H>  -  Lighting /Lighting off block,4      <F5>        -  Writing in the Results' Window.A$     (See "Writing Information in File" and "Hot Keys").A     "Windows with information" may contain words (names, towns),= marked out by  brightened symbols.  You may get the required information moving:>    - mouse cursor to the word and press the left mouse button2      (word will be "highlighted" in this moment).=    - cursor to the word (it will be "highlighted") and press      the key <Enter>.>     To exit to DOS, use the <F10> key. To call  the "Service"=$ menu  press  the  <F9>  key.  The "hot keys" are always1 available to experienced users of the Data Bank.*                  The Data Bank Structure*                  ───────────────────────  ┌────────────────────┐8$  │ Central Authority  │ - Structure of authoritiesJ$  │ Moscow Authority   │ - To receive information  of Moscow authori-E  └────────────────────┘   ties select Moscow from the list of towns,E                           or Moscow Region from the list of regions.  ┌────────────────────┐J$  │ Joint Ventures     │ - Information  of enterprises  (AlphabeticalJ$  │ Banks              │   indexes  of all enterprises containing  in*  │ Exchanges          │   the Data Bank )  │ Brokers Offices    │  │ Insurance Agencies │$  │ Enterprises        │  └────────────────────┘  ┌────────────────────┐J$  │ Regions of Russia  │ - Leadership of each  region, brief  geogra-D  └────────────────────┘   phical  data  with  the  location  of theE                           region  on   the  map  of Russia, lists ofE                           enterprises   located    on   the   region$                           territory  ┌────────────────────┐J$  │ List of Names      │ - Alphabetical  lists of all names and towns;$  │ List of Towns      │   containing in the Data Bank  └────────────────────┘)                       Central Authority)                       ─────────────────)                ╔═══════════════════════╗)                ║        Central        ║)                ║       Authority       ║)                ╚════╤══════╤══════╤════╝,             ┌───────┘      │      └───────┐2       ┌─────┴─────┐  ┌─────┴─────┐  ┌─────┴─────┐2       │ Structure │  │ Structure │  │ Structure │2       └──┬─────┬──┘  └───────────┘  └─────┬─────┘/          │     └───────────┐              └──┐7   ┌──────┴───────┐  ┌──────┴───────┐  ┌──────┴───────┐7   │ Substructure │  │ Substructure │  │ Substructure │7   └──────┬───────┘  └───┬──────┬───┘  └──────────────┘/          │              │      └─────────────┐6    ┌─────┴───────┐  ┌───┴──────────┐  ┌──────┴──────┐6    │ Subdivision │  │ Subdivision  │  │ Subdivision │6    └─────────────┘  └──────────────┘  └─────────────┘=     If you   are   step-by-step   selecting   the   required= structures and substructures of the authorities you can  see= the end screen with names of officials and their telephones,C$ or find the person you need in the alphabetical list of names= and get at once the end screen with information. To clear up= what  substructure  and  structure  the found subdivision is= related to,  use  the  point  "Hierarchie" to  go  one level upwards (see Fig.).&                       Joint Ventures&                       ──────────────=     You can  find  any  Joint  Venture  in  the Data Bank by= searching the complete list of Joint Ventures. If,  however,= you have already selected one of the regions of Russia, then= you only  find the Joint Ventures registered in this region.5     Finally, you can select the town you want in the<$ general list of towns  and  find  the  Joint  Ventures: registered in the selected town or having founders there.	#                             Banks#                             ─────=     You may  select  the  bank  you  need  in  the   general= alphabetical   list   of   banks  (notice  two  lower  lines= containing the full denomination of  the  bank  selected  by= cursor), or you may select first the region of Russia or the! town where the bank is situated.0                Searching Information in Window0                ───────────────────────────────=     There are available two ways of search in the Data Base:     - context search,     - "Rapid search".D     The context search is possible in windows  with  index  and  in some menus.?     You can execute "Rapid search" only in windows with index.D     At search  there  are  made no distinctions between the capital and small letters.?     The context search is carried out ahead all over the text.D     "Rapid search" is to execute only by start symbols  of  strings of index elements.D     To enter the  context  search  mode  you  may  press  the  keysD <Ctrl-F>. On the screen appears the message: "Enter search string".D Type the necessary substring and press the <Enter> key. If the sub-D string is found,  the cursor shows its position in the text. Other-D wise you'll get the message,  that the substring is not  found.  ToD continue  the search of the same substring from the cursor position press the <Ctrl-L> keys.D     "Rapid search" is executed by direct typing the symbols.  AfterD typing each symbol the cursor moves over  the  text  to  the  found string.D     "Rapid search" is especially convenient at  work  with  "alpha- betical index of names".F                           Print                           ─────?     You may print the list of enterprises, contests of the end3window or information on some selected enterprises.,              Printing the enrerprises' list?     Choose the list of enterprises you are interested in (e.g.>enterprises of a concrete region or enterprises, producing the?given articles or enterprises  of the given branch and  so on).@If you press the key F3, this list (e.g. the enterprises' index)2would be printed or written in the necessary file./              Printing contents of the end file@     If you select a concrete element  of the list and press the@key <ENTER> (e.g. you'll have on the screen the contents  of the@end file), you may print the information of this window or write'it in a file after pressing the key F3.<      You may print a part of the information. You need only?$ to insert the desired information in the block. Then  youAhave to press the keys <Ctrl-K-P>  or to call the menu  "Service"Aby pressing the key <F9>  and to execute the item "Selected block
to print".I$   See also "Results` Editor" and "Writing Information in File".1         Printing information on some enterprisesD       The list  of enterprises,  that you need  to print,  you haveD to select using the key  <Insert>.  To output the information pressD the key <F3>, select the type of the printer and the printing font,D then press the key "Print". If you press instead of the key "Print"D the key  "In file",  the necessary  information would be written in file..                  Writing Information in File.                  ───────────────────────────>     To output information in file in the process of work with=$ the Data Bank you have to find the required information and  insert it in the block.C     If it is not necessary to edit the text, you may at once writeB the block in file  (with the help of the keys <Ctrl-K-W>  or callA the "Service" menu  pressing the <F9> key  and  execute the item "Selected block in file").@     If you have to edit text,  write  the block in the Results'?$ Window (by the "hot key" <F5>  or call the "Service" menu. and execute the item "Selected text to log").@     It should be noted  that if  the  Results' Window  containsB already information from previous texts, then the new information@ is  writing  below  the previous one.  Therefore  the  previous' information may be saved if necessary.@     After inserting  the necessary at the moment information in@$ the  Results' Window,  you  need  to call  Results' Editor@ (pressing the "hot key" <F4>  or calling the "Service" menu and  executing the item "Edit log").B     In the Results' Editor  you may edit information and write it	 in file.>     To write information in file from the Results' Editor you= have to go on the screen  in the  menu item  "Write in file"= with the help of the key <Tab> and pressing the key <Enter>.<     Choose the proposed name "REPORT.TXT" or enter your own? file name. If you assign the file name "PRN" backed up in DOS,: the result would be output to the printer (print answer).
/                   Alphabetical Index of Names/                   ───────────────────────────=      You can search for names of all persons included in the= Data Bank.   After  you  have  choosen  the  name   of   the= person  you  are  interested in, you get the screen with the= information about  the  organization  to  which  he  or  she= belongs.  The  cursor  is  located at the selected name. The= information about organizations  often  exceeds  the  screen= size.  To  display  the  full  information,  use  the cursor:$ direction keys. (See "How to  Use  the  Data  Bank",'  "Windows with required information")./                   Alphabetical Index of Towns/                   ───────────────────────────=      The Data  Bank  contains  a Town Index.  After you have= choosen a town from this Index,  you can get the list of the= enterprises  located  in  the given town (and Joint Ventures= having founders in this town) on the screen.  In addition to= the alphabetical index, you may select any town, highlighted= in the address (by locating the cursor at  it  and  pressing= the  <Enter> key) and the capital of any region (by choosing! the "Capital" item of the menu).x&                    Using the "Mouse"&                    ─────────────────B   By working with the mouse you can have access to all  functions;$  ┌────────┐   of the Data Bank.  All the operations canB$  │██ ▓▓ ▓▓│   be  executed  by  moving  the mouse  cursor to aB$  │██ ▓▓ ▓▓│   certain point on  the  screen  and  by  clicking($  │██ ▓▓ ▓▓│   the LEFT mouse button.$  │┌──────┐│$  ││      ││$  ││      ││$  └┴──────┴┘)                    Menu Point Selection)                    ────────────────────>    Move the mouse cursor to the desired option  and press the> left button. Your selection will be highlighted. Confirm your3 selection by clicking the left mouse button again.3             Selecting Commands on the Status Line3             ─────────────────────────────────────=    Move the mouse cursor to the desired  command  and  click the left button.:        Closing the Message Window and the "Service" Menu:        ─────────────────────────────────────────────────A$  ╔═[■]══════     Move the  mouse  cursor to the [■] characterA$  ║            in the left upper  window  corner and click the                  left button.%                   Scrollable Window%                   ─────────────────D$  ▄▄▄▄▄▄▄▄▄▄▄▄       The label (2)  shows  the percentage of  theD$  █          ── 1  information displayed. To scroll the display,D$  █          ▒      position  the  mouse cursor  at  the  desiredD$  █          ■── 2  location  on  the vertical bar  at  the rightD$  █          ▒      the hand  side of display  (between  arrows 1D$  █          ── 3  and 3) and locate there the label by pressing#$  █▄▄▄▄▄▄▄▄▄▄█      left button.>        You can  scroll the text up  one line  by  moving  the> mouse cursor to one of the arrows (1) or (3)  and by pressing> the left  button. To scroll  continuously text,  position the> mouse cursor to the upper or lower boundary of the window and> press the left button. To stop scrolling, release the button.*                         Selecting  Block*                         ────────────────=    You can write blocks of text to the temporary log file or to the permanent file.=    To select the block you wish to write, position the mouse= cursor at the beginning of the block, press the left button,= then without releasing left button,  direct the mouse cursor= to the end of the block and release the button when you have finished your selection.=    You can  "unselect"  the block by clicking the left mouse2 button when the mouse cursor is inside the block.-                    Cross Reference Transfer-                    ────────────────────────;     "Windows with information"  may contain  words (names,; towns), marked out by brightened symbols.  You may get the; required information moving the mouse cursor  to this word< and press the left mouse button (word will be "highlighted" in this moment).(                      Hot Mouse Buttons(                      ─────────────────<     Although you can perform all the  operations  with  the<  left   mouse  button,  the other  buttons  perform  useful<  functions, too. Their action does not depend on the  mouse<  cursor  position  as  is in the case with the left button.,  That is why they are called "hot buttons".$  ┌────────┐D$  │▓▓ ▓▓ ██│  The RIGHT button: Transfer to the previous screen -<$  │▓▓ ▓▓ ██│                    similar to the <Esc> key.$  │▓▓ ▓▓ ██│$  │┌──────┐│$  ││      ││$  ││      ││$  └┴──────┴┘$  ┌────────┐3$  │██ ▓▓ ██│  TWO buttons simultaneously: Help -A$  │██ ▓▓ ██│                              similar to <F1> key.$  │██ ▓▓ ██│$  │┌──────┐│$  ││      ││$  ││      ││$  └┴──────┴┘$  ┌────────┐4$  │▓▓ ██ ▓▓│  The CENTER button: "Service" menu -9$  │▓▓ ██ ▓▓│                      similar to <F9> key.$  │▓▓ ██ ▓▓│$  │┌──────┐│$  ││      ││$  ││      ││$  └┴──────┴┘$  ┌────────┐C$  │██ ██ ██│  THREE buttons simultaneously: Go to the Main Menu.$  │██ ██ ██│$  │██ ██ ██│$  │┌──────┐│$  ││      ││$  ││      ││$  └┴──────┴┘$    (See "Hot Keys").&+                          Selecting  Block+                          ────────────────=    You can write blocks of text to the temporary log file or= to the permanent file. We recommend the use of the mouse for= this purpose,  because  we  consider  the  other methods too	 complex. 1.  With the mouse=    To select the block you wish to write, position the mouse= cursor at the beginning of the block, press the left button,= then without releasing left button,  direct the mouse cursor= to the end of the block and release the button when you have finished your selection. 2.  Without mouse (method 1)?    Move  the  cursor  to  the  beginning  of  the block  to be? highlighted and press  simultaneously the keys <Ctrl> and <K>,? after that without releasing the <Ctrl> key, press the key <B>? (we designate this combination  as <Ctrl-K-B>).  Then move the? cursor  to the end of the block  and  execute  the combination <Ctrl-K-K>. 3.  Without mouse (method 2)=    You can specify a block  by pressing  simultaneously  the= <Shift> key   and   one   of   the   direction   keys,  e.g.= <Shift-right>,  <Shift-Ctrl-PgDn> etc.  (See "How to Use the4$ Data Bank", Window with Required Information).?    You can use any combination of the above-described methods.8    You can "unselect" the block by pressing <Ctrl-K-H>.>    You can "unselect" the block by clicking  the  left  mouse2 button when the mouse cursor is inside the block.5,                    Command Line Parameters,                    ───────────────────────9    When starting  the Data Bank, you can add a number of+ parameters to determine its configuration.5    The default options are identified with asteriks.         Monitor:          /C - color mode          /B - black-white          /M - monochrome'        * /A - automatic mode selection         Screen Line Number:        * /E- - 25 lines?          /E+ - 43/50 lines (only if EGA or VGA display adapter                is available);         Starting Language:         * /LC - Current           /LR - Russian           /LE - English=     The option /L is specified  only  for  the  multilingual= version, the options /LR, /LE  are  specified  in accordance3 with the language set of your  Data  Bank version.#         Display /Keyboard Driver:@         * /N+ - installable (only if EGA or VGA display adapter                 is available),           /N- - external.         Special Options,           /W  - save memory entered optionsB           /R - recover the default condition (/A, /E-, /LC, /N+).=     You may indicate  one  option,  several options simulta-= neously or omit them at all. The options  function  for  the= current   start  of  the   Data  Bank,  but  if  among  them= there is the /W option, then they are saved on the disk  and= at the  next  start  of  the Data Bank they would  not  need= to  be  specified.  The  /R  option is an exception and will1 always retrieve the default condition from disk.        Example:        ────────=        US.EXE /B /W - Install the Black / White menu, during= the  current  and  next  starts would be kept just that very= menu till starting with the flag  /R  (US.EXE  /R)  or  with2 other flags exerting influence on the video menu.-0                Switching Language and Keyboard0                ───────────────────────────────<      You may  change  the  language  only  if  you  have  a' multilingual version of the Data Bank.<      It is possible for the current language to be  changed: any  time,  you  can  search  for  an  information in one& language and view it in an other one.<      To input in language change mode, call "Service"  menu< (the <F9> key) and choose the "Switch the language" option.@$ You can make the same using the "hot key" <F8>. Select the- language you want and press the <Enter> key.<      The  Data  Bank   program  begins  to   work   in  the< language selected in the previous session. You can choose a< definite  language  and  set  up  the  Guide to use it. The% sections "Setting-up Configuration",>$ "Selecting the starting language"  explain how to do it.=     It is  possible  to  switch  the  keyboard  for  another= alphabet at any moment  in  each  point  of  the  Data  Base= (except  special  cases),  what  provides at work additional= possibilities. You may work in one language and enter text -= in  another,  this  is  especially  convenient  at search ofD$ information in windows (s. 	"Searching Information in Window").=     The current  keyboard  is  indicated in the lower row in the last right field.7     It is possible to switch the keyboard in two ways:=     - To  call  the  "Service"  menu  with  the <F9> key and= execute  the point  "Switch keyboard".  Select  the  desired$ keyboard and press the key <Enter>.=     - To press the  keys  <Ctrl-F8>.  For  the  multilingual= version  of  the Data Bank you have to repeat <Ctrl-F8>,  as' long as you see the required keyboard.=     In some  cases  the  switching  of  the  keyboard may be executed automatically:=     - At  the  change  of language the keyboard switches for the matching alphabet.=     - In the mode of writing information in file at entering< the file name the keyboard switches for  the Roman alphabet*$ (see "Writing Information in File").1                 Writing Information on Envelope2                 ────────────────────────────────A     To output information on the envelope you need to select theC desired list of the enterprises or the end window and to press the!               keys   <Ctrl> <F3>D You'll see the format of an address on the envelop. You may confirmD or change it and then output the information direct  to the printer or to the choosen file.D     If you  have formed beforehand the list of enterprises, it willD be output  to the printer  as  many addresses, as the number of theE enterprises in the list. The content of each address consists of theE following fields: Address of the enterprise, Name of the enterprise,/ Family name, name and patronymic of the chief.B     By pressing the key <Insert> you may preliminary select thoseB enterprises from the available list,  for  which  you want to get	 address.
#                        "Hot Keys"#                        ──────────;    <F1> - Help, from inside of the help screens "Contents"+    <F2> - "Statistical Portrait of Russia"    <F3> - Print    <F4> - Results' Editor/    <F5> - Writing block in the Results' Window1    <F7> - Setting-up the Data Bank Configuration@    <F8> - Changing language (for the multilingual version only)    <F9> - "Service Menu"    <F10> - Exit to DOS.&                          Enterprises&                          ───────────=     You may  choose the required enterprise from the general= alphabetical  list  of  enterprises  or  from  the  list  of<$ enterprises  situated  in the selected region or town.= Specify at first the  branch,  then  search  the  enterprise= among the enterprises of the given branch (or after you have= specified  the  region  among the enterprises related to the3 given branch and situated in the selected region).=     The    Data  Bank    allows   you    to    search    for= enterprises  ordered  in  accordance with their products and= services. After you have selected the products you want from= the general index of goods and services, or from the list of= products of the region, you can view the list of enterprises= manufacturing the given  products  or  rendering  the  given= services.  You  can also specify the branch, get the list of= the products manufactured by the  enterprise  of  the  given;$ branch and choose the products you are interested in.=     In addition to the above mentioned ways you may view the0 list of enterprises contained in the Data Bank.,                          Regions of Russia,                          ─────────────────=     After you  have  choosen  the desired region you can get= information of geographical sifuation of the given region (a= map indicating the region and a  brief  geographical  data),= information  of  region  leadership  and  indexes  of  Joint= Ventures, banks, exchanges and enterprises situated  in  the= region.  Selecting  the  item   "Capital"  you  may  receive0 information of the capital of the given region.Ä6                 R U S S I A  (Statistical Portrait)6                 ───────────────────────────────────(                       (January 1, 1993) CAPITAL - Moscow( TERRITORY - 17.075.4 thousand sq meters6 POPULATION (January 1. 1992) - 148.8 mln, including :8    Russians - about 130 mln,  Tatars - more than 5 mln,5    Ukrainians - about 4 mln,  Germans - about 2 mln,.    (more than 130 peoples and nations live on    the territory of Russia).'    Urban population - 109.0 mln (1990)&    Rural population - 38.8 mln (1990)    Men - 69.4 mln (1990)    Women - 78.6 mln (1990)  MINERALS AND NATURAL RESOURCES:!    wood - 20% of world reserves;!    coal - 30% of world reserves;!    oil  - 40% of world reserves;!    gas  - 45% of world reserves;"    shale - 50% of world reserves;%    iron ore - 44% of world reserves;'    chrome ore - 30% of world reserves;*    manganese ore - 74% of world reserves;,    rare earth ores - 40% of world reserves.>    28% of diamond and 30% of precious stones world production    are concentrated in Russia. FORMATION OF MARKET ECONOMY:=     the share of the non-state sector in the total amount of<     industry enterprises: lease - 16 per cent, private pro-     perty - 3.6 per cent.6     Total amount of registered new economy formations4     is 800 thousand. Two thirds of these formations5     are functioning in the sphere of the small-scale9     business undertakings. Within January-September 1992-     were privatized 24 thousand enterprises.7     In the republic were registered about 150 thousand:     individual farms, owning 6 mln ha of land (2 per cent8     of arable areas); share in the total volume of food     production - 4-5 per cent.
 INDUSTRY:<     the volume of industrial production in the valid prices<     in January-September 1992 makes up 8.8 trillion roubles=     and increased in comparison with the same period of 1991;     11.6 times. Physical volume of production decreased by     17.6 per cent.A     Russia produces 17.9% world machine-building products, e.g.:4     22% world production of metal-cutting machines;6     46% world production of grain harvester combines;;     11.3% world production of equipment for food industry;/     63.2% world production of power equipment;(     27% world production of aeroplanes;6     about 50% world production of military equipment;%     21% world production of lorries;#     4.8% world production of cars;:     (Machine-building production of the Republic are used?     in base branches of industry of Korean People's DemocraticA     Republic - 35 %, India - 36 %, Iran - 45 %, Pakistan - 65 %,0     Turkey - 20 %, Egypt - 50 %, Lybia - 50 %).=     To the share of Russia falls 16 % of world production of     electric power.@ GROSS OUTPUT in JANUARY-SEPTEMBER 1992  (January-September 1992.     in % relation to January-September 1991):     meat - 3.0 mln t (73%);(     sausage products - 1.1 mln t (70%);2     grain and bakery products - 13.0 mln t (95%);0     strong drinks - 55.5 mln  decalitres (92%);+     cigarettes - 108000 mln pieces (104%);     TV sets - 2.603 mln (78%);7     refrigerators and deep-freezers - 2.315 mln (83%);(     vacuum cleaners - 3.074 mln (86 %);&     automobiles - 723 thousand (95%).#     soap - 78.3 thousand t (71 %). WAGES:.     monthly wage in national economy averages%     in October 1992 was 8853 roubles?     monthly wage in October 1992  in some branches of national
     economy:"     in industry - 10.373 roubles;      transport - 13.373 roubles;:     crediting and insurance (commercial banks) - about 17     thousand roubles;>     in public health, social security and physical training -     5.706 roubles;(     in public education - 5000 roubles;@     Inflation rate in the beginning of January 1993 made up 9 %     weekly.	 STRIKES:A     in the first half-year of 1992 there were strikes with dura-A     tion of the working day and longer at 5670 enterprises in 60A     regions of Russia, in which took part 334 thousand strikers.=     EXPORT (January-September 1992) - 24.200 mln USA dollarsB     (decreased by 35 % in relation with the same period of 1991).=     IMPORT (January-September 1992) - 26.400 mln USA dollarsB     (decreased by 17 % in relation with the same period of 1991).
 REFUGEES:6     Russia numbers 386.3 thousand persons, officially)     declared as refugees (October 1992). UNEMPLOYED:@     More than 650 thousand unemployed are registered in Russia,     (December 1992). PUBLIC HEALTH:?     The Republic numbers 657.8 thousand  physicians  and 1.691?    thousand  medical  attendants and nurses.  During 1990-1991@     reckoning 10 thousand population the number of physiciansof@     all  specialities  lowered  from  46.9 to 43.8,  of medical@     attendants  and nurses - from  122.6 to 112.3.  The average@     level of satisfying  the  needs of population for medicinesB     makes 70 per cent (33 per cent of required medicines produces     the home industry). EDUCATION:=     At the beginning of the 1991-1992 school-year there were     in Russia:B     6.8 thousand schools with extended study of subjects (3.9 mln     students);)     306 gymnasias (219 thousand pupils);'     198 Lyceums (115 thousand pupils);1     85 private schools (to the 1 December 1991);0     519 high schools (2 861 thousand students);9     2.6 thousand specialized schools (2.2 mln students);@     in pre-school establishments were brought up 8 mln children$     (64 %  children of proper age). VOLUME OF FOREIGN DEBT:?     to the begin of 1993 accounted for 75.800 mln USA dollars.B     "Infosevice-Unison" and "Project-Kampo" express thanks to the>      Russian Information Agency "Novosti" ("RIA-Novosti") forB      rendering information on the Statistical Portrait of Russia.D<  Copyright (C) 1992, 1994 by "Infoservice-Unison", Moscow,                     Software=  Copyright (C) 1992, 1994 by Joint-Stock Co. "BIS", Moscow,!                     Information/  Copyright (C) 1993 by "RIA-Novosti", Moscow,6                     "Statistical Portrait of Russia"%                 All Rights Reserved!                     Version 3.31             UNISON is a registered trademark of-                "Infoservice-Unison", Moscow.                  Press any key to continue...