The FastCPU program can automatically determine the type of your CPU unit and the frequency control range. You may not set the values exceeding the limits which are recommended for your unit by the FastCPU automatic analysis.
FastCPU v.2.1
Megasoft2000 Ltd
1999-2001
Palm Software
Division.
Platform: Palm OS 3.0, 3.1, 3.3, 3.5 (B/W), 3.5 (Color).
This program is intended to increase (to decrease) the clock
frequency of the central processor (CPU).
Clock frequency control range:
FastCPU v.2.0 is not Hack and doesn't use the
HackMaster program for its operation.
Install over FastCPU v1.x
1) Disable FastCPU hack in HackMaster
2) Reset device
3) Delete FastCPU hack
4) Install FastCPU 2.1
Install over FastCPU v2.0
1) Launch FastCPU 2.0
2) Ensure its state is OFF (if FCPU state is ON then press "FCPU state" button and press Accept).
3) Delete FastCPU 2.0 application
4) Install FastCPU 2.1
Don't use other programs for CPU performance increase or decrease
at the same time!
Note!
Before installation make sure the date on your Palm device is valid (use
Preferences application).
How does the FastCPU work?
The FastCPU program can automatically determine the type of your
CPU unit and the frequency control range. You may not set the
values exceeding the limits which are recommended for your unit
by the FastCPU automatic analysis.
In order to activate the FastCPU it is necessary to press the
"FCPU state: Off" button. After pressing the button
will change its state to the "FCPU state: On".
Then it is necessary to set the appropriate frequency for each
application with the help of arrows (for frequency increase or
decrease). If you want to adjust the common frequency for all
applications you should press the area: 
and set the required frequency in the window.
1. Area (1)
pressing - set frequency for all applications to its minimal value
2. Area (2) pressing - set frequency for all applications to its normal value
3. Area (3) pressing - set frequency for all applications to its maximum value
Pressing the "Accept" button results in the storage of
all made changes and the exit from the FastCPU application.
Pressing the "Cancel" button results in the exit from
the program without saving the latest changes.
When selecting the "lock" symbol you can set the
individual frequency for the certain application. On setting the
common frequency this individual frequency will not change until
this symbol is on.
For registration of the FastCPU press the (Menu icon) 
button: 
For uninstalling FastCPU you should ensure its state is "OFF" (use "FCPU state:" button) and then press "Accept" button. It may be necessary to reset your device and after that you will be able to delete FastCPU from your device.
In case of fatal error the FastCPU is to be
disengaged by tapping screen area at any point during device reseting:
1) Reset your device using back reset hole
2) Quickly tap screen area and hold it until Preferences application shows
Note:
- Some frequency values can cause an
unsteady operation when using the external keyboard and the Beam
function.
- It is not recommended to turn on (turn off) any hacks (by Hackmaster) on the fly while FastCPU is running.
We will appreciate all your remarks and comments which can be
addressed to:
This program is written by : Boris WM Sozin and Arthur
Asloyan.
All rights reserved.
Megasoft2000 Ltd. 1999-2001