The GIT
package contains three interactive programs and a few
additional utilities. Here there is a description of each of them.
git
is a file system browser with some shell like features
designed to make your work much easier and much efficient. It displays
one or two panels, each one containing a file system directory. You can
browse the directory tree with the usual cursor keys, pressing
ENTER when you want to enter or leave a directory and TAB
when you want to change the panels.
Under the two panels there is a shell like input line which you can use to type normal shell commands. The input line can handle an unlimited number of characters and keeps a history of typed commands (using the GNU history library).
Under the input line there is a status bar. You can see there the status of the currently executed command, the warnings and errors and you will be prompted if a decision has to be taken.
git
now provides a new, easy to remember, scheme to bind commands
on keys. This is only a convention, if you define new key bindings you
may, or may not follow it.
All the file commands start with ^C. This prefix can be followed by some modifiers, in order to affect the default behavior of the given command. These modifiers are b and r.
b - this modifier specifies that the command will run in background:
^CM = CHMOD; chmod %s{New mode of %i: ,%m} %i;;;;y
defines a command that changes the current selected files mode in foreground, while
^CbM = B-CHMOD; chmod %s{New mode of %i: ,%m} %i&;;;;y
defines a background command that does the same thing.
r - this modifier specifies that the command will be run recursively:
^CrM = R-CHMOD; chmod -R %s{New mode of %i: ,} %i;;;;y
defines a command that recursively changes the mode of the selected entries.
The b and r modifiers can be combined, the resulting command running recursively and in background:
^CbrM = B-R-CHMOD; chmod -R %s{New mode of %i: ,} %i&;;;;y
You should also note that for some commands (like gzip
) there is
no need for a non-recursive version. Running gzip
recursively on
files is harmless. If there is a directory between these files,
gzip
will recursively compress that directory, so you can use the
same key binding for recursively and non-recursively compressing. In
fact, it is a matter of selecting files or directories.
Unfortunately, we can't run chmod
recursively trying to change
the mode of all the files in a directory to 0644 because that directory
might contain subdirectories and removing the execution permission from
them is a bad idea. So, in this case, we need separate commands.
This is a brief description of the command line arguments.
-h
print this help message
-v
print the version number
-i
print the installation directory
-c
use ANSI colors
-b
don't use ANSI colors
-l
don't use the last screen character
-p
output final path at exit
The -p
option can be used to make git force bash (assuming that
you're using it as your shell) chdir to the last directory git was in
before quitting. In order to do this, you need to invoke git using this
function (put it into your .profile):
function g { git -p $ 3> /tmp/git.p.$$ if test -s /tmp/git.p.$$; then if test -d "`cat /tmp/git.p.$$`"; then cd "`cat /tmp/git.p.$$`" else cd fi fi rm -f /tmp/git.p.$$ }
This will not work if you suspend git. Nothing bad will happen, just the chdir will not be performed.
git
has three major modes of displaying the panels. In the first
(default) mode, two panels are displayed, each one using half of the
screen. In the second mode, only one panel uses the entire screen. In
the third mode, only the status bar and the input line are displayed,
both panels being hidden.
Briefly, a panel can use the entire screen or just half of it. Even when a panel is hidden, it still exists.
Users can switch between these three major modes as needed:
^X 0
Enlarges the other panel to use the entire screen. It also changes the minor mode to `Enable all'. The current panel will become invisible (`enlarge-other-panel').
^X 1
Enlarges the current panel to use the entire screen. It also changes the minor mode to `Enable all'. The other panel will become invisible (`enlarge-panel').
^X 2
Switches back to the two panel mode (`two-panel-mode').
^O, ESC o
Switches to the tty mode (no panels on the screen) (`tty-mode').
Basically a panel displays the files and directories in a directory. You can optionally specify some additional information about each entry (file, directory, ...) to be displayed (a minor mode).
When using the full screen mode, all the minor modes here can be used. In half screen mode, the `panel-enable-all' mode is not available.
These are the panel minor modes:
ESC d o
Display the entry owner and group (`panel-enable-owner-group').
ESC d d
Display the entry date and time (`panel-enable-date-time').
ESC d s
Display the entry size (`panel-enable-size').
ESC d m
Display the entry mode (`panel-enable-mode').
ESC d f
Display the entry full name (`panel-enable-full-name').
ESC d a
Display the entire information about file (`panel-enable-all'). This mode is only available if the panel has been enlarged to use the entire screen with `enlarge-panel' or `enlarge-other-panel' (`panel-enable-all').
There is also another way to change the panel minor modes:
^], ^[]
Switches to the next panel minor mode (`panel-enable-next-mode').
Entries in a panel can be sorted in different ways. These are the available options:
ESC s n
Display the panel entries sorted by their names (`panel-sort-by-name').
ESC s e
Display the panel entries sorted by their extensions (`panel-sort-by-extension').
ESC s s
Display the panel entries sorted by their sizes (`panel-sort-by-size').
ESC s d
Display the panel entries sorted by their `last modified' stamps (`panel-sort-by-date').
ESC s m
Display the panel entries sorted by their modes (`panel-sort-by-mode').
ESC s o i
Display the panel entries sorted by their owner ids (`panel-sort-by-owner-id').
ESC s g i
Display the panel entries sorted by their group ids (`panel-sort-by-group-id').
ESC s o n
Display the panel entries sorted by their owner names (`panel-sort-by-owner-name').
ESC s g n
Display the panel entries sorted by their group names (`panel-sort-by-group-name').
There is also another way to change the sort method:
ESC s u
Switch to the next panel sort method (`panel-sort-next-method').
Moving the cursor in the panel is very easy. If your keyboard has arrows, use them. If the arrow keys don't work (it might be due to a badly configured TERM environment variable), you can use the Emacs commands bindings as well.
UP, ^P
Move the cursor vertically up one entry (`previous-line').
DOWN, ^N
Move the cursor vertically down one entry (`next-line').
HOME, ESC <
Move the cursor on the first entry in the panel (`beginning-of-panel').
END, ESC >
Move the cursor on the last entry in the panel (`end-of-panel').
PGUP, ESC v
Move the cursor vertically down one page (`scroll-down').
PGDOWN, ^V
Move the cursor vertically down one page (`scroll-up').
ESC g
Scroll the panel entries to the left (`horizontal-scroll-left').
ESC j
Scroll the panel entries to the right (`horizontal-scroll-right').
^X P
In order to optimize the screen output, you can modify the scroll step (`set-scroll-step'). This is the number of lines to try scrolling a panel when the cursor moves out. The `StartupScrollStep' specifies the initial scroll step, but using `set-scroll-step' you can dynamically change it.
TAB, ^I, ^X o
Move the cursor in the other panel (`other-panel').
^X P
Switch the two panels. This command works even when git
is not
in the `two panels' mode (`switch-panels').
INS, ^T, ^X \, ^\
Toggle the `selected' flag of the current entry (`select-entry').
^C s
Select (marks) all the files matching at least one pattern from a space separated list of shell patterns. Spaces and \s are allowed in the patterns but they have to be escaped with a \. (`select-files-matching-pattern').
^C u
Unselect (unmarks) all the files matching a pattern (`select-files-matching-pattern'). The user will be prompted for a pattern to match against.
Users sometime need to search a file in a panel, especially when the
panel contains a big number of entries. For that reason git
provides an incremental search feature. Using forward and backward
incremental search, files can be very easy located. Wrapped incremental
search is also provided.
^S, ^Xs
Incremental search forward a file name in the current panel
(`isearch-forward'). Pressing ^S or ^Xs again will
force git
to go to the next entry that matches the current
isearched string. When the end of the panel is reached, the isearch is
restarted from its beginning.
^R, ^Xr
Incremental search backward a file name in the current panel
(`isearch-backward'). Pressing ^R or ^Xr again will
force git
to go to the next entry that matches the current
isearched string. When the beginning of the panel is reached, the
isearch is restarted from its end.
The input line is one of the main methods used by git
to interact
with the user. All the answers the user should give in order to perform
some operation and all the shell like commands are built using it. So
here is a description of all the basic editing operations that the
`input line' provides. They are very much inspired from
Emacs
, so Emacs
users should have no problem using them.
Typing characters is the most usual way of inserting text into the input
line. Key sequences starting with printable ascii characters are not
allowed in git
so typing a for example results in inserting
a at the current point position. Of course, there are some other
ways of inserting text into the command line and here there is a
description of most of them.
ESC RET
Copy the current entry name into the input line at the current point position (`entry-to-input-line').
ESC ESC RET
Copy the other panel path into the input line at the current point position (`other-path-to-input-line').
^X ^I
Copy the names of all the selected entries into the input line at the current point position (`selected-entries-to-input-line').
^B, LEFT
Move the point backward one character (`backward-char').
^F, RIGHT
Move the point forward one character (`forward-char').
ESC b
Move the point one word backward (`backward-word').
ESC f
Move the point one word forward (`forward-word').
^A
Move the cursor at the beginning of the input line (`beginning-of-line').
^E
Move the cursor at the end of the input line (`end-of-line').
DEL, ^D
Delete the character under the cursor (`delete-char').
^H, BKSPC
Delete the character before the cursor (`backward-delete-char').
ESC BKSPC
Delete backward one word (`backward-kill-word').
ESC d
Delete forward one word (`kill-word').
ESC k
Delete the entire line (`kill-line').
^U
Delete all the characters between the beginning of the input line and the point (`kill-to-beginning-of-line').
^K
Delete all the characters between the point and the end of the input line (`kill-to-end-of-line').
ESC SPC
Delete all the spaces around the point, leaving only one space (`just-one-space').
ESC \
Delete all the spaces around the point (`delete-horizontal-space').
^W
Save the region between the point and the mark into the kill "ring" and then kills it (`kill-region'). Note that there is no real kill-ring here. The so-called kill-ring has only one entry.
ESC w
Save the region between the point and the mark without killing it (`kill-ring-save').
ESC l
Convert the following word to lower case, moving over. (`downcase-word').
ESC u
Convert the following word to upper case, moving over. (`upcase-word').
ESC c
Capitalize the following word, moving over. (`capitalize-word').
A separate history is kept for both built-in and user-defined commands. If you call a command that you have used before, you can re-edit a previously entered string in order to minimize the amount of characters needed to be typed for the new one. There is no limit on the number of strings that can be kept in the history.
ESC p
Walk backward through the history of previously entered strings (`previous-history-element').
ESC n
Walk forward through the history of previously entered strings (`next-history-element').
^SPC
Set the mark at the current point position (`set-mark').
^X ^X
Exchange the current point position with the mark one (`exchange-point-and-mark').
^Y
Reinsert a previously killed text at the current point position (`yank').
F5, ESC 5, ^C C
Copy the currently selected entries to the user supplied path (`copy').
^C b C
Copy the currently selected entries to the user supplied path. The operation is performed in background (`B-COPY').
F6, ESC 6, ^C T
Move the currently selected entries to the user supplied path (`move').
^C b T
Move the currently selected entries to the user supplied path. The operation is performed in background (`B-MOVE').
The easiest way to create a new file is to start an editor passing the file name as an argument. Most editors will try to create the file if the file doesn't exist. See section Editing Files, for more information.
F8, ESC 8, ^C D
Delete the currently selected entries (`delete').
^C b D
Delete the currently selected entries. The operation is performed in background (`B-DELETE').
^C H
Create a hard link from the current files to a user supplied file name (`LINK').
^C b H
Create a hard link from the current files to a user supplied file name (`B-LINK'). The action is performed in background.
^C S
Create a symbolic link from the current files to a user supplied file name (`SYMLINK').
^C b S
Create a symbolic link from the current files to a user supplied file name (`B-SYMLINK'). The action is performed in background.
^C R
Rename the current file or directory with the user supplied name (`RENAME').
^C b R
Rename the current file or directory with the user supplied name. The operation is performed in background (`B-RENAME').
^C n d
Change the name of all the selected entries to lowercase. (`name-downcase').
^C n u
Change the name of all the selected entries to uppercase. (`name-upcase').
^C ~
Pack the files into the smallest number of bins. This is in fact an approximation, since the problem is NP-complete and no known algorithm can guarantee a solution better than `(11/9) * OPTIMAL + 4'. To make things even worst, it is generally difficult to figure out the file system block size for the target bin. Asking the user is not a good idea either. `git' currently assumes a file system block size of 1Kb. Also, for large file, there is no portable way to predict how many blocks the file system implementation will require for indirect blocks, directories, etc. Bin packing can be useful when you want to put a bunch of files on floppies and you want to optimize things a little bit (`bin-packing').
^C M
Change the mode of the currently selected entries (`CHMOD').
^C b M
Change the mode of the currently selected entries. The operation is performed in background (`B-CHMOD').
^C r M
Recursively change the modes of the selected entries if one of them is a directory (`R-CHMOD').
^C b r M
Recursively change the modes of the selected entries if one of them is a directory. The operation is performed in background (`B-R-CHMOD').
^C O
Change the owner of the currently selected entries (`CHOWN').
^C b O
Change the owner of the currently selected entries. The operation is performed in background (`B-CHOWN').
^C r O
Recursively change the owners of the selected entries if one of them is a directory (`R-CHOWN').
^C b r O
Recursively change the owners of the selected entries if one of them is a directory. The operation is performed in background (`B-R-CHOWN').
^C G
Change the group of the currently selected entries (`CHGRP').
^C b G
Change the group of the currently selected entries. The operation is performed in background (`B-CHGRP').
^C r G
Recursively change the groups of the selected entries if one of them is a directory (`R-CHGRP').
^C b r G
Recursively change the groups of the selected entries if one of them is a directory. The operation is performed in background (`B-R-CHGRP').
F4, ESC 4
Call the default editor with the current file name as an argument (`EDIT').
^X e
Call the default editor with the selected entry names as arguments (`MULTIPLE-EDIT').
^X ^F
Create a new file by calling the default editor with the user supplied file name as an argument (`FILE-CREATE').
^X 4 a
Call the default editor in order to edit the `ChangeLog' file (`CHANGE-LOG').
The default editor can be specified using the EDITOR or GIT_EDITOR environment variables. See section Environment Variables, for more information.
F3, ESC 3
Call the default viewer (gitview
) with the current file name as
argument (`VIEW').
^X v
Call the default pager (more
) with the currently selected entry
names as arguments (`MULTIPLE-VIEW').
^C z
Compress the currently selected entries (`COMPRESS').
^C b z
Compress the currently selected entries. The operation is performed in background (`B-COMPRESS').
^C Z
Uncompress the currently selected entries (`UNCOMPRESS').
^C b Z
Uncompress the currently selected entries. The operation is performed in background (`B-UNCOMPRESS').
^C f Z
Uncompress the currently selected entries (`F-UNCOMPRESS'). Force uncompression of links.
^C b f Z
Uncompress the currently selected entries. Force uncompression of links. The operation is performed in background (`BF-UNCOMPRESS').
^C e
Encode the currently selected file (`UUENCODE').
^C b e
Encode the currently selected file. The operation is performed in background (`B-UUENCODE').
^C E
Decode the currently selected file (`UUDECODE').
^C b E
Decode the currently selected file. The operation is performed in background (`B-UUDECODE').
^C k
Encode the currently selected file using mpack (`MIME-PACK').
^C b k
Encode the currently selected file using mpack. The operation is performed in background (`B-MIME-PACK').
^C K
Decode the currently selected file using munpack (`MIME-UNPACK').
^C b K
Decode the currently selected file using munpack. The operation is performed in background (`B-MIME-UNPACK').
^C p
Encrypt (using pgp
) the current file (`ENCRYPT').
^C P
Decrypt (using pgp
) the current file (`DECRYPT').
^C =
Compare (using diff
) the current ASCII file with the other
panel's current file (`DIFF'). If both entries are directories, a
recursive diff is performed.
^C ESC =
Compare (using diff
) the current ASCII file with its latest
backup. The latest backup is the file having the same name and a '~' at
the end (`LAST-BACKUP-DIFF').
^C B
Compare the current file with the other panel current file. A binary comparison is performed (`compare').
^X I
Run the ispell
command with the current file name as an
argument.
^C j
Print the selected files vialpr
to the user specified printer or to the default one if nolpr
options are given (`PRINT-JOB').
^C J
Print the list of active printing jobs vialpq
. The default printer is queried if nolpq
options are given (`PRINT-JOB-LIST').
^C W
Call gitwipe
to wipe the selected files. Asks for confirmation
before actually wiping them in order to avoid errors (`WIPE').
See section The GIT wipe file utility, for more information.
ESC %
Searche files on the file system, starting from the current directory (`FIND').
ESC &
Use 'locate' to search files on the file system, starting from the current directory (`LOCATE').
^X w
Locate the binary, source, and manual page files for a command (`WHEREIS').
^X W
Locate a command; display its pathname or alias (`WHICH').
^C a
Create a tar
archive containing all the currently selected
entries (`TAR').
^C b a
Create a tar
archive containing all the currently selected
entries. The operation is performed in background (`B-TAR').
^C x
Create a compressed tar
archive containing the current entry,
provided it is a directory (`TAR-COMPRESS').
^C b x
Create a compressed tar
archive containing the current entry,
provided it is directory. The operation is performed in background
(`B-TAR-COMPRESS').
^C -
Create a bzip2 compressed tar
archive containing the current
entry, provided it is a directory (`TAR-BZIP2').
^C b -
Create a bzip2 compressed tar
archive containing the current
entry, provided it is a directory. The operation is performed in
background (`B-TAR-BZIP2').
^C X
Expand the selected archives into the current directory. The utility used is selected based on the extension of the file (`GENERIC-UNPACK').
^C b X
Expand the selected archives into the current directory. The utility used is based on the extension of the file. The operation is performed in background (`B-GENERIC-UNPACK').
^C V
Expand the selected archives into an user supplied current directory. The utility used is selected based on the extension of the file (`GENERIC-UNPACK-INTO').
^C b V
Expand the selected archives into an user supplied directory. The utility used is based on the extension of the file. The operation is performed in background (`B-GENERIC-UNPACK-INTO').
Red Hat Linux Distributions use a very powerful package manager called
rpm
. It is used whenever you need to install/remove/upgrade/etc
a software package. The packages used by rpm
use the extension
`.rpm'. git
provides default key bindings for some of the
basic operations rpm
can perform on packages: install, uninstall,
upgrade and query.
^C I
Install the rpm
package pointed by the cursor
(`RPM-INSTALL').
^C b I
Install the rpm
package pointed by the cursor
(`B-RPM-INSTALL'). The operation is performed in background.
^C i
Uninstall the rpm
package pointed by the cursor
(`RPM-UNINSTALL').
^C b i
Uninstall the rpm
package pointed by the cursor
(`B-RPM-UNINSTALL'). The operation is performed in background.
^C N
Upgrade the rpm
package pointed by the cursor
(`RPM-UPGRADE').
^C b N
Upgrade the rpm
package pointed by the cursor
(`B-RPM-UPGRADE'). The operation is performed in background.
^C q
Query therpm
package manager (`RPM-QUERY'). The default options used are `-qil'. See therpm
manual page for more details on usingrpm
.
^C t
Print the type of a file using the file
utility
(`FILE-TYPE').
^C m d, ^C m ^D
Change the current MSDOS
directory to a given directory
(`MTOOLS-CHDIR').
^C m P
Put the currently selected files on a MSDOS
floppy
(`MTOOLS-PUT').
^C b m P
Put the currently selected files on a MSDOS
floppy
(`B-MTOOLS-PUT'). The operation is performed in background.
^C m G
Get some files from a MSDOS
floppy and put them in a given
directory (`MTOOLS-GET').
^C b m G
Get some files from a MSDOS
floppy and put them in a given
directory (`B-MTOOLS-GET'). The operation is performed in
background.
^C m D
Delete files from a MSDOS
floppy (`MTOOLS-DELETE').
^C b m D
Delete files from a MSDOS
floppy (`B-MTOOLS-DELETE'). The
operation is performed in background.
^C m L
List files and directories on a MSDOS
floppy (`MTOOLS-DIR').
^C m F
Format a MSDOS
floppy (`MTOOLS-FORMAT').
^C b m F
Format a MSDOS
floppy (`B-MTOOLS-FORMAT'). The operation is
performed in background.
^C m M
Create a directory on a MSDOS
floppy (`MTOOLS-MKDIR').
^C b m M
Create a directory on a MSDOS
floppy (`B-MTOOLS-MKDIR').
The operation is performed in background.
^C m K
Remove a directory from a MSDOS
floppy (`MTOOLS-RMDIR').
All the files and subdirectories in that directory are removed as well.
^C b m K
Remove a directory from a MSDOS
floppy (`B-MTOOLS-RMDIR').
All the files and subdirectories in that directory are removed as well.
The operation is performed in background.
^C m R
Rename a file or directory on a MSDOS
floppy
(`MTOOLS-RENAME').
^C b m R
Rename a file or directory on a MSDOS
floppy
(`B-MTOOLS-RENAME'). The operation is performed in background.
^C m T
Display the contents of a file located on a MSDOS
floppy
(`MTOOLS-TYPE').
Many files on UNIX
systems have one or more extensions specifying
their types. For example, a file that ends in `.c' is a file
containing a C
program, while a file ending in `.tar.gz' is
a tar
archive compressed with the gzip
utility. Having a
default action for each file type, binded on the same key, seems to be a
good idea because you can use that key to obtain type specific
information about a file or to process it in some type specific way much
easier. The GIT
package contains a script called
gitaction
that is used to detect the current file type and
perform a type specific action. See section The GIT per file type action script, for more information.
F2, ESC 2, ^X a
Perform an action on the current file, depending on its type (`FILE-ACTION').
F7, ESC 7, ^X M
Create a new subdirectory in the current directory with the user supplied name (`make-directory').
F5 (for directories), ESC 5 (for directories), ^C C (for directories)
Copy the currently selected entries to the user supplied path (`copy').
^C b C (for directories)
Copy the currently selected entries to the user supplied path. The operation is performed in background (`B-COPY').
F8 (for subdirectories), ESC 8 (for directories), ^C D (for subdirectories)
Delete the currently selected entries (`delete').
^C b D (for directories)
Delete the currently selected entries. The operation is performed in background (`B-DELETE').
F6 (for directories), ESC 6 (for directories), ^C T (for directories)
Move the currently selected entries to the user supplied path (`move').
^C b T (for directories)
Move the currently selected entries to the user supplied path. The operation is performed in background (`B-MOVE').
^C R (for directories)
Rename the current file or directory with the user supplied name (`RENAME').
^C b R (for directories)
Rename the current file or directory with the user supplied name. The operation is performed in background (`B-RENAME').
^C c q
Quickly compare the files in the left panel with the files in the right one. Only the file names, sizes and time stamps are considered in the comparison.
^C c t
Compare the files in the left panel with the files in the right one. The contents of each file in the current panel will be compared against the contents of its couterpart (if any) from the other panel.
^C f d
Recursively compare (using diff -r -q
) the current directory with
the other panel's current directory (`FAST-DIFF'). Print on
standard output the names of the files that differ.
^C d
Compare (using diff
) the current directory with the other panel
current directory. For successful operation, both panels should contain
the same directory (`DIR-DIFF').
^C b d
Compare (using diff
) the current directory with the other panel
current directory. For successful operation, both panels should contain
the same directory. The operation is performed in background
(`DIR-DIFF').
^C U
Display the output of the du -s
command on the status line
(`DIRECTORY-USAGE').
^X d, ^X ^D
Change the current working directory. The user is asked for a new directory name and the new directory is added to the directory history (`change-directory').
See section Directory History, for more information.
ESC a c
Change the current directory of the current panel to the directory of the other panel (`adapt-current-directory').
ESC a o
Change the current directory of the other panel to the directory of the current panel (`adapt-other-directory').
Users usually work on a limited set of subdirectories. Providing a fast
method of switching between a number of intensively used directories is
a good idea and git
has a set of builtin commands for doing it.
Usually new directories are added to the directory history when the
`change-directory' built-in command is used. git
also adds
the current directory to the history list when started, when the
directory history is reseted and when a command having a non empty
`new-dir' field successfully completes its execution.
See section The new-dir field, for more information.
^X ^N
Go to the next directory in the history (`next-directory').
^X ^P
Go to the previous directory in the history (`previous-directory').
^X ^R
Reset the entire directory history. As explained above, the current directory becomes the only directory in the history (`reset-directory-history').
git
provides default key bindings for switching to a number of
important directories as "/", "..", "$HOME", etc.
ESC /
Go to the `/' directory (`ROOT-DIR').
ESC .
Go to the `..' directory (`up-one-dir').
ESC h
Go to the `~' ($HOME) directory (`HOME-DIR').
ESC i
Go to the `/usr/include' directory (`INCLUDE-DIR').
ESC ESC 1
Go to the `/mnt/fd0' directory (`FIRST-FLOPPY-DIR').
ESC ESC 2
Go to the `/mnt/fd1' directory (`SECOND-FLOPPY-DIR').
F9, ESC 9, ^X m
Run the make
command in the current directory. Use -k as the
default option (`MAKE').
^X b m
Run the make
command in background in the current directory
(`B-MAKE').
See section The GIT per file type action script, for more information.
^C 2 a
Send the current current ascii file by mail to an user supplied email address (`ASCII-MAIL').
^C b 2 a
The same as `ASCII-MAIL', the only difference being that the command runs in background (`B-ASCII-MAIL').
^C 2 b
Send the current current binary file by mail to an user supplied list of email addresses. The file is uuencoded first (`BINARY-MAIL').
^C b 2 b
The same as `BINARY-MAIL', the only difference being that the command runs in background (`B-BINARY-MAIL').
^C 2 m
Send the current current binary file by mail to an user supplied list of email addresses. The file is encoded with mpack first (`MIME-MAIL').
^C b 2 m
The same as `MIME-MAIL', the only difference being that the command runs in background (`B-MIME-MAIL').
ESC x r m
Run the emacs -f rmail
command. This will start the Emacs's
`rmail' function so that you can read your mail (`READ-MAIL').
^X z
Call a sub-shell as specified by the $GIT_SHELL environment variable (`SUB-SHELL').
See section Environment Variables, for more information.
^X g
Search using grep
all the selected files for a given pattern
(`GREP').
^X g
Search recursively using gitrgrep
all the user specified files
and directories for a given pattern (`RECURSIVE-GREP').
See section The GIT recursive grep script, for more information.
Having a lock feature might be a good idea and, since not all the
UNIX
systems provide one, git
tries to get around the
problem ...
^X p
Prompt the user for a password and locks the console until the same password is reinserted (`lock').
Sometimes your screen needs to be refreshed. Just think about what happens when somebody wants to talk with you and the talk daemon writes something like this
Message from Talk_Daemon@galei.cs.vu.nl at 12:15 ... talk: connection requested by andrei@galei.cs.vu.nl. talk: respond with: talk andrei@galei.cs.vu.nl
on your screen. And sometimes you might also want to re-read the
current directories. git
provides some built-in commands for
refreshing the screen contents.
^L
Re-read the directories contents and refresh the screen (`refresh').
^X ^L
Call reset
in order to reset the terminal to its default
settings (`TTY-RESET').
People dealing with lots of files usually need to save/restore/copy
files from/to other file systems. In order to be more efficient,
git
provides a set of key bindings for mounting and unmounting
file systems. See section The GIT mount utility, for more information.
The default key bindings set has been designed to work under
Linux
, but it can be easily changed for other UNIX
systems
with different device names. Reading the configuration file
`.gitrc.common' should be enough. See section Hot Keys, for more
information.
As a convention, the `/mnt' directory is used to store an empty
subdirectory for each mountable file system. Each file system is
actually mounted in its counterpart `/mnt' subdirectory. Try to
follow this convention since the gitmount
script is heavily based
on it. See section Customizing GNU Interactive Tools, for more information.
ESC m a
Call mount
(1) in order to mount the first floppy
(`/dev/fd0') in the `/mnt/fd0' directory (`MOUNT-A').
ESC m b
Call mount
(1) in order to mount the second floppy
(`/dev/fd1') in the `/mnt/fd1' directory (`MOUNT-B').
ESC m c
Call mount
(1) in order to mount the cdrom
(`/dev/cdrom') in the `/mnt/cdrom' directory (`MOUNT-CDROM').
ESC m z
Call mount
(1) in order to mount the zip drive
(`/dev/zip') in the `/mnt/zip' directory (`MOUNT-ZIP').
ESC m j
Call mount
(1) in order to mount the jaz drive
(`/dev/jaz') in the `/mnt/jaz' directory (`MOUNT-JAZ').
ESC m t
Call mount
(1) in order to mount the file systems corresponding to
the selected subdirectories. For example, if you are in the `/mnt'
directory and the `cdrom' and `zip' subdirectories are
selected, the cdrom and the zip disk will be mounted (`MOUNT-THESE').
ESC r a
Call umount
(1) in order to remove (unmount) the first floppy
(`/dev/fd0') (`UMOUNT-A').
ESC r b
Call umount
(1) in order to remove (unmount) the second floppy
(`/dev/fd1') (`UMOUNT-B').
ESC r c
Call umount
(1) in order to remove (unmount) the cdrom
(`/dev/cdrom') (`UMOUNT-CDROM').
ESC r z
Call umount
(1) in order to remove (unmount) the zip drive
(`/dev/zip') (`UMOUNT-ZIP').
ESC r j
Call umount
(1) in order to remove (unmount) the jaz drive
(`/dev/jaz') (`UMOUNT-JAZ').
ESC r t
Call umount
(1) in order to remove (unmount) the file systems
mounted into the selected subdirectories. For example, if the current
directory is `/mnt' and the `cdrom' and `zip'
subdirectories are selected, the cdrom and the zip disk will be
unmounted (`UMOUNT-THESE').
^X T
Call date
(1) in order to display the current time/date
(`DATE').
ESC S f
Call finger
(1) in order to display information about local and
remote users (`FINGER').
ESC S m
Call mount
(1) in order to display a list of the currently
mounted file systems (`MOUNTED-FILE-SYSTEMS').
ESC S q
Call quota
(1) in order to display a user file system disk quota
and quota (`QUOTA').
ESC S s
Call df
(1) in order to get the status of the currently mounted
file systems (`DISK-FREE-SPACE').
ESC S u
Call users
(1) in order to get the name of the currently logged in
users (`USERS').
ESC S v
Call$GIT_VMSTAT
(1) in order to get the current virtual memory status. This is very system dependent,Linux
usesfree
, other systems usevmstat
, so the $GIT_VMSTAT variable is used to deal with this (`VIRTUAL-MEMORY-STATUS').
See section Environment Variables, for more information.
ESC S w
Call who
(1) in order to find out who is on the system
(`WHO').
^X E
Call env
(1) in order to display the current environment
(`ENV').
^X H
Call xhost
(1) in order to add/remove hosts names to the list
allowed to make connection to the X server (`XHOST').
There are at least two kinds of ps
(1) utilities. One that
accepts (more or less) combinations of the 'a', 'u', and 'x' flags and
another that accepts combinations of 'e', 'f' and 'l' flags. Since is
quite difficult to test which one works fine on a given UNIX
system, git
provides key bindings for both of them. Anyway, if
your ps
(1) fails to accept the predefined combinations, please
take a look in its manual and then modify the `.gitrc.TERM' file as
needed.
Since the number of possible combinations of flags in the ps
command line is quite big and *very* system dependent, there is no real
reason to display them all here. We are only interested in giving you
a starting point in your search through the `.gitrc.TERM' file.
Note also that you can display a list of processes using ps
(1) or
browse through a list of them (killing as needed) using gitps
.
As a convention, we have used the same key sequence for a given set of
ps
(1) flags for both ps
(1) and gitps
, the only
difference being that ps
(1) keys end in an uppercase letter.
See section The GIT process viewer/killer, for more information.
Under Linux it is possible to see a tree of processes using
pstree
(1).
Here there are the default key bindings for the 'e', 'f' and 'l'
ps
(1) flags combinations:
ESC P b, ESC P c, ESC P e
Callgitps
orps
(1) in order to browse through or display a list of currently running processes (`GITPS', `PS').
... and the default key bindings for the 'a', 'u' and 'x' ps
(1)
flags combinations:
ESC P a, ESC P l, ESC P u ESC P x, ESC P y
Callgitps
orps
(1) in order to browse through or display a list of currently running processes (`GITPS', `PS').
ESC P T
Call pstree
(1) in order to displat the tree of currently running
processes (`PSTREE').
^X k
Call kill
(1) in order to kill a user specified process with a
given signal (`KILL').
^X S
Call sync
(1) in order to synchronize all the file systems
(`SYNC').
^X q
Read a manual page. The user is prompted for its name (`MAN').
F1, ESC 1, ^X i
Read an info documentation. The user is prompted for the documentation name (`INFO').
^X h
Read the html documentation (`HTML').
F10, ESC 0, ^X ^C, ^X c
Exit GNU Interactive Tools (`exit').
gitps
is an interactive process viewer/killer. It calls
internally the ps
(1) utility. This is a brief description of the
command line arguments.
-h
print this help message
-v
print the version number
-i
print the installation directory
-c
use ANSI colors
-b
don't use ANSI colors
-l
don't use the last screen character
-p
pass the remaining arguments to ps(1)
Running gitps
it is self explanatory. Use the arrows,
PageUp, PageDown, Home, End, ^N, ^P,
^V, ESC v to move in the list, ^L to refresh it and
F10 or ^X ^C to leave.
You can change these keys, just read the GITPS-Setup, GITPS-Color, GITPS-Monochrome and GITPS-Keys sections in the configuration files `.gitrc.TERM'.
gitview
is an ASCII/HEX file viewer. Use the arrows,
PageUp, PageDown, Home, End, ^N, ^P,
^V, ESC v to move in the file, ^L to refresh the
screen and F10 or ^X ^C to leave.
You can change these keys, just read the GITVIEW-Setup, GITVIEW-Color, GITVIEW-Monochrome and GITVIEW-Keys sections in the configuration files `.gitrc.TERM'.
Here is a brief description of the command line arguments:
-h
print this help message
-v
print the version number
-i
print the installation directory
-c
use ANSI colors
-b
don't use ANSI colors
-l
don't use the last screen character
gitkeys
is a program that displays the key sequence sent by the
pressed key. This is the key sequence received by GIT
tools, so
this program is useful when setting up the `.gitrc.TERM'
configuration files.
gitwipe
is an utility for wiping files. It overwrites the file
contents with a random sequence of numbers and then calls `sync'().
Note that gitwipe
does *not* delete the file since (under
Linux
at least) the `sync'() system call might return before
actually writing the new file contents to disk. Deleting the file might
be dangerous because some file systems can detect that the blocks in the
file are no longer used and never write them back to disk in order to
improve performance. It is up to you to delete the file(s) at a later
moment.
gitmount
is a script that allows you to mount a list of block
devices (specified in the command line), without specifying the file
system type. With a command like `gitmount fd0 cdrom' the first floppy
will be mounted in `/mnt/fd0' and the cdrom will be mounted in
`/mnt/cdrom'. Make sure your `/etc/fstab' settings are
correct.
You don't need to know the file system type anymore. If you want to use
gitmount
with the block device `/dev/xxx' then the directory
`/mnt/xxx' must exist. gitmount
will attempt to create the
necessary directories, but root permissions might be required.
gitaction
is a script that executes a different action for each
file type specified. It is called by the git
program when
pressing F2, ESC 2 or ^Xa.
The first parameter is the current directory name and the second one is the file name to be matched against the default patterns. The matching is done using the shell 'case' statement.
If you press F2, ESC 2 or ^Xa on a `*.c' file,
git
will compile it, if you press F2, ESC 2 or
^Xa on a `*.tar.gz' file, git
will list the tar
archive contents, if you press the same keys on a `*.gz' file,
git
will display its uncompressed contents on the screen, etc
...
If you want to find out what the default action for each file type is
(or if you want to modify it), just read/modify the gitaction
script. If no pattern is found, the file is displayed using
more
.
If you press F2, ESC 2 or ^Xa on a `*.gif' file
or `*.jpg' file and you have the zgv
utility installed, you
will be able to see it. If you want to change the gif/jpeg viewer, all
you need to do is to change its name in the gitaction
script.
Also, you can add a .gitaction
shell script in your home
directory and/or in any other directory. Before trying to match a file
name, gitaction
will attempt to execute ./.gitaction
. If
that one fails to match the file name against its patterns, it backs up
to $HOME/.gitaction
. When this one fails too the patterns in
gitaction
are tried. For an example of how to write .gitaction
scripts take a look at the .gitaction
shell script provided as
part of the distribution and installed in the `$(prefix)/bin'
directory.
gitunpack
is a shell script that accepts a directory and a set of
archives as its command line parameters, and then attempts to unpack
those archives in the given directory, selecting the utility used to
unpack the archives based on the archive extensions.
gitrgrep
is a very small script that calls grep
recursively. It accepts grep
like options / parameters, the only
difference being that file specifications should be quoted:
gitrgrep
main '*.c' orgitrgrep
errno '*.c *.h'
gitregrep
and gitrfgrep
are recursive versions of the
egrep and fgrep programs.
Go to the first, previous, next, last section, table of contents.