2 Unexpected error retrieving list of Dial-Up Networking connections.
3 Choose New connection to create a Dial-Up Networking connection.
4 Choose Dial to access a network using the selected Dial-Up Networking connection.
5 Connecting to
6 Connection Status
7 The Dial-Up Networking Connection "
8 " no longer exists.Choose another Dial-Up Networking connection or create a new one.
9 The Dial-Up Networking Connection no longer exists. Choose another Dial-Up Networking connection or create a new one.
10 The modem is not available. Disconnect any active LapLink modem connections. If another communications program is running, close it. Then try again.
11 Dial-Up Networking is not available. One or more Dial-Up Networking program files are missing.
12 Dial-Up Networking is not available. If Dial-Up Networking is not installed, use Add/Remove Programs in the Control Panel to install it. Then try again.
13 Dial-Up Networking is already using the modem for this Connection.Wait for the connection to complete, or if necessary, stop the connection and then try again.
14 The modem is in use by another Dial-Up Networking connection. Disconnect the other connection and then try again.
15 The modem is in use by another Dial-Up Networking connection.Select Hang Up Modem from the Connection menu to close the otherconnection and then try again.
16 The modem is in use by the Dial-Up Networking connection to
17 .Select Hang Up Modem from the Connection menu to close the current connection and then try again.
18 Dial-Up Networking is already using the modem to connect to
19 .Wait for the connection to complete, or if necessary, stop the connection attempt and then try again.
20 The modem is not installed or configured for Dial-Up Networking. Check your modem configuration by clicking Properties in the Connect over Dial-Up Networking dialog.
100 Opening port...
101 Port opened...
102 Dialing...
103 Connected...
104 All devices connected...
105 Verifying user name and password...
106 Request for user name and password...
107 Retrying user name and password...
108 Callback requested...
109 Change password requested...
110 Projection phase started...
111 Link speed calculation...
112 User name and password acknowledged...
113 Reverifying user name and password...
114 User name and password verified...
115 Preparation for callback...
116 Waiting for modem reset...
117 Waiting for callback...
118 Interactive...
119 Retring username and password...
120 Callback set by caller...
121 Password expired...
122 Connected...
123 Disconnected...
124 Undefined Dial-Up Networking status...
125 Projected...
126 Verifying user name and password...
127 Callback complete...
128 Logging on to the Network...
129 Close the Dial-Up Networking connection to
130 Close the Dial-Up Networking connection?
131 ?
132 The computer is not receiving a response from the modem.Make sure the modem is connected properly and try turning the modem off and then back on.
133 Setting up the modem for Dial-Up Networking use...
134 Setting up the modem for LapLink use...
135 The phone number has been changed. Dial Properties can only be applied to the original phone number. Click OK to return to the original phone number and allow Dial Properties to be applied. Click Cancel to continue with the current phone number.
136 The phone number has been changed. Phone number modifications based on location can only be applied to the original number . Click OK to return to the original number and apply the location changes. Click Cancel to continue with the current number.
137 The phone number to be dialed has been changed.Click OK to return to the original number and edit the Dial-Up Networking connection's properties. Click Cancel to continue with the current number.
138 Hanging up the modem...
139 Connected to
140 The Dial-Up Networking phone book DLL (RNAPH.DLL) was not found.Reinstall LapLink for Windows 95.
141 The Dial-Up Networking phone book DLL (RNAPH.DLL) is not valid.Reinstall LapLink for Windows 95.
142 The modem for the selected connection was not found.To install a modem, double click the Modems icon in Control Panel.
