Quake add-on Future vs. Fantasy Quake This is a shareware add-on for Quake that allows you to use multiple classes, ranging from an andriod to a barbarian, with over 50 new weapons and skills. The install is different from a standard add-on. You'll need to create an FVF directory within your Quake directory (i.e. if Quake is installed to C:\QUAKE, you'll create a C:\QUAKE\FVF directory). You can then put all the Future vs. Fantasy files within the FVF subdirectory. Run FVF by typing QUAKE - GAME FVF at the command line. There is also a README.TXT file that may be helpful. QUAKEFVF\FVF3.ZIP No contact info available http://www.
Quake add-on Quake: The Vigil The Vigil is a single player package that drops you in the middle of a Tomb to protect your partners grave from being pillaged. It's a very strategic map with limited ammo, so you have to think before you shoot whle dozens of monsters appear and attack. Unlike a standard add-on, you'll need to create a VIGIL subdirectory inside your Quake directory (i.e. if Quake is installed to C:\QUAKE, you need to make a C:\QUAKE\VIGIL subdirectory). You can then move the VIGIL.ZIP file and unzip it (you can also move the PAK0 file found in the QUAKE directory of our CD). Run the game by typing QUAKE -GAME VIGIL at the command line. QUAKE\VIGIL.ZIP No contact info available http://www.
Quake add-on Quake: Beyond Belief Beyond Belief is a completely new episode for Quake, excellent architecture and good game logic made this one of the most popular map packages available. See the README.TXT file in the QUAKEBB directory on the PC Gamer CD for loading instructions. QUAKEBB\BBELIEF.ZIP No contact info available http://www.
Quake add-on Quake Deathpack These two add-ons are part of the Quake Deathpack. You have to follow a few simple steps to load these new levels. STEP 1: Copy the file to your \QUAKE\ID1\MAPS directory. STEP 2: Load the Quake game as usual. STEP 3: Once the game is loaded, hit the ESC key to bring up the console and type MAP followed by the name of the file. For example, if the filename is DSPIRL11, you would type: MAP DSPIRL11 at the console. As with all add-on levels, updates, or patches make sure your original files are backed up. PC Gamer will not accept any responsibility for problems caused by these files. QUAKE\BASE32B.BSP & DEATH32C.BSP No contact info available http://www.
Quake add-on (BSP) Quake add-on: The Ranger Base Quake Levels (also known as BSP) are add-on levels. You have to follow a few simple steps to load these new levels. STEP 1: Copy the file to your \QUAKE\ID1\MAPS directory. STEP 2: Load the Quake game as usual. STEP 3: Once the game is loaded, hit the ESC key to bring up the console and type MAP followed by the name of the file. For example, if the filename is DSPIRL11, you would type: MAP DSPIRL11 at the console. As with all add-on levels, updates, or patches make sure your original files are backed up. PC Gamer will not accept any responsibility for problems caused by these files. QUAKE\RANBASE.BSP No contact info available http://www.
Duke Nukem Levels Duke Nukem 3D: Space Port This is not the standard level update. It's an entirely new level for Duke Nukem 3D. Type INSTALL at the \DUKE3D directory on the CD. This will replace the entire 3rd level of the game. As with all add-on levels, updates, or patches make sure your original files are backed up. PC Gamer will not accept any responsibility for problems caused by these files. DUKE3D\SPACEPRT.MAP No contact info available http://www.
Duke Nukem Levels Duke Nukem 3D: The Lazer's Beam This is not the standard level update. It's an entirely new level for Duke Nukem 3D. Type INSTALL at the \DUKE3D directory on the CD. This will replace the entire 3rd level of the game. As with all add-on levels, updates, or patches make sure your original files are backed up. PC Gamer will not accept any responsibility for problems caused by these files. DUKE3D\LUKE.MAP No contact info available http://www.
C&C: Red Alert C&C: Rocky Ridge To load a Command & Conquer: Red Alert level (known as MPRs), copy the file into your Red Alert directory (usually \WESTWOOD\REDALERT). If the file is zipped, unzip it using PKUNZIP or WINZIP (not provided with this CD). Once you've copied the level to the Red Alert directory, load Red Alert as usual. The levels can only be played in Multiplayer mode, either against other players, or against the computer in Skirmish mode. Simply start up a multiplayer game as usual, and select the new map as the scenario to play (the new maps usually appear at the bottom of the list). For example, if the name of the file is RIVERCRO.MPR, River Crossroads should appear in the Scenario list once it's copied over to the \WESTWOOD\REDALERT directory. REDALERT\ROCKYRI0.MPR No contact info available http://www.
C&C: Red Alert C&C: Red Alert: In the Far North... To load a Command & Conquer: Red Alert level (known as MPRs), copy the file into your Red Alert directory (usually \WESTWOOD\REDALERT). If the file is zipped, unzip it using PKUNZIP or WINZIP (not provided with this CD). Once you've copied the level to the Red Alert directory, load Red Alert as usual. The levels can only be played in Multiplayer mode, either against other players, or against the computer in Skirmish mode. Simply start up a multiplayer game as usual, and select the new map as the scenario to play (the new maps usually appear at the bottom of the list). For example, if the name of the file is RIVERCRO.MPR, River Crossroads should appear in the Scenario list once it's copied over to the \WESTWOOD\REDALERT directory. REDALERT\FARNORTH.MPR No contact info available http://www.
Yoda Stories Yoda Stories Updates Fixes problems related to various zones. \PATCHES\YOPATCH5.ZIP LucasArts http://www.lucasarts.com
Doom II WAD Doom II WAD: Series Level One WAD files are actually add-on scenarios for DOOM II Here's the standard procedure on using WADs. First, copy the WAD file to your DOOM2 directory. Then type: DOOM2 -FILE WADNAME.WAD * where -FILE = would appear just as it is * where WADNAME.WAD = is the name of the WAD file you wish to load i.e. To run the MARKET.WAD for Doom 2, type: DOOM2 -FILE MARKET.WAD. As with all WADS, updates, add-ons or patches make sure your original files are backed up. PC Gamer will not accept any responsibility for problems caused by these files. DOOM2\SIERIES.WAD No contact info available http://www.
Doom II WAD Doom II WAD: Judgement WAD files are actually add-on scenarios for DOOM II Here's the standard procedure on using WADs. First, copy the WAD file to your DOOM2 directory. Then type: DOOM2 -FILE WADNAME.WAD * where -FILE = would appear just as it is * where WADNAME.WAD = is the name of the WAD file you wish to load i.e. To run the MARKET.WAD for Doom 2, type: DOOM2 -FILE MARKET.WAD. As with all WADS, updates, add-ons or patches make sure your original files are backed up. PC Gamer will not accept any responsibility for problems caused by these files. DOOM2\JUDGEMNT.WAD No contact info available http://www.
WarCraft II PUD WarCraft II PUD: War in the Middle Warcraft II PUDs are actually additional scenarios for the game. To load a Warcraft II level, copy the file into your Warcraft II directory (usually \WAR2). Once you've copied the PUD to the Warcraft II directory, load Warcraft II as usual. Select a Single Player game. Select the Custom Scenarios (not the Built in Scenarios!). The new PUD should appear in this listing. For example, if the name of the file is GREATWAR.PUD. GREATWAR should appear in the Custom Scenario list once it's copied over to the WARCRAFT II directory. As with all WADS, updates, add-ons or patches make sure your original files are backed up. PC Gamer will not accept any responsibility for problems caused by these files. WAR2\WARITM.PUD No contact info available http://www.
WarCraft II PUD WarCraft II PUD: Jerkland Warcraft II PUDs are actually additional scenarios for the game. To load a Warcraft II level, copy the file into your Warcraft II directory (usually \WAR2). Once you've copied the PUD to the Warcraft II directory, load Warcraft II as usual. Select a Single Player game. Select the Custom Scenarios (not the Built in Scenarios!). The new PUD should appear in this listing. For example, if the name of the file is GREATWAR.PUD. GREATWAR should appear in the Custom Scenario list once it's copied over to the WARCRAFT II directory. As with all WADS, updates, add-ons or patches make sure your original files are backed up. PC Gamer will not accept any responsibility for problems caused by these files. WAR2\JERKLAND.PUD No contact info available http://www.
Ardennes Offensive Ardennes Offensive CD-ROM fix Allows you to use CD-ROMs with drive letters higher than H. PATCHES\TAO.EXE SSI http://www.ssionline.com
Steel Panthers II Steel Panthers II v.1.01a Fixes for the "China War" campaign and the "Rolling on the River" scenario. PATCHES\SP2V101A.ZIP SSI http://www.ssionline.com
BG: Gettysburg Battleground: Gettysburg v.1.32 Fixes "bases-off" highlighting bug, AI reporting bug when artillery is limbered, melee bug that resulted indouble losses for the defending unit, and various crashes. Changes leader losses in an automatic-victory melee from "Killed" to "Captured." Makes minor adjustments to unit strengths in several scenarios in the Gettysburg and Little Round Top modules. PATCHES\BGG_132.ZIP TalonSoft http://www.talonsoft.com
Broken Alliance Broken Alliance v.1.02 Fixes small bugs and makes numerous changes to the weapons database. PATCHES\BA_102.ZIP HPS Simulations http://www.
Dragons in the Mist Dragons in the Mist v.1.01 Fixes small bugs and makes numerous changes to the weapons database. PATCHES\DM_101.ZIP HPS Simulations n/a
Panthers in the Shadows Panthers in the Shadows v.1.21 Fixes small bugs and makes numerous changes to the weapons database. PATCHES\PS_121.ZIP HPS Simulations n/a
Tigers on the Prowl II Tigers on the Prowl II v.2.06 Fixes small bugs and makes numerous changes to the weapons database. PATCHES\TOP_206.ZIP HPS Simulations n/a
Callahan's Crosstime Callahan's Crosstime Saloon v.1.01 Corrects the tattoo parlor animation "sparkle" and the "dead-end" when talking to the Gypsy in Transylvania, and adds specific "handling" to the extras in the bar. PATCHES\CCS101.EXE Legend Entertainment http://www.legendent.com
Diablo Diablo v.1.04 Prevents invalid players from interacting with other players and invalid packets from crashing players. Fixes the Hidden Shrine freeze, the Black Death crash (which occurred when fighting the monsters with an active Mana Shield and Full Health), and the functionality of the Rogue's Disarm Trap skill. PATCHES\DIABLO.ZIP Blizzard http://www.blizzard.com
Grand Prix Manager II Grand Prix Manager II v.1.02 The read-me file for this patch claims that "Every line of program code has been upgraded to make it a fast, strealined, 32-bit application." Okay, if you say so. The race section is much faster, multi-player games are more stable, and DirectPlay support has been added. PATCHES\GPM2.ZIP MicroProse http://www.micropose.com
Magic: The Gathering Magic: The Gathering v.1.25 Dozens of AI and card-specific changes have been made for this version. The computer also now plays faster, the win/loss record inthe Status screen now continues past 100 entries, and crashes and palette shifts have been corrected. CAUTION: This will not work with any previous save games. PATCHES\MTGV125.ZIP MicroProse http://www.microprose.com
Jetfighter III Alpha Jetfighter III Alpha Version 2 3DFX/MMX Upgrade A test version of a graphics acceleration pack. PATCHES\JF33DFX2.ZIP Mission Studios http://www.missionstudios.com
Shangai Great Moments Shanghai Great Moments v.2.02 Eliminates a problem with decompressing tile sets on hard drives larger than 1.6GB. PATCHES\SHGMV202.EXE Activision http://www.activision.com
Quake Movie Quake Movie This is an impressive movie of a group of guys who beat Quake in less than 20 minutes. Actually, it's their best missions pieced together, but since it's the entire game of Quake, it's still mighty impressive. We were surprised at the WOW factor from everyone who watched the movie. It's amazing to see just how good these guys are at rocket-launching themselves around. NOTE: To run this move, you must load up the registered version of Quake, pull down the console (the tilde key) and type PLAYDEMO ALL_1949. QMOVIE\ALL_1949.DEM No contact info available http://www.
