STL_Check : Modifier

Constructor

stl_check ...

Properties

<STL_Check>.Selection_Type Integer default: 4

Selects incorrect geometry specific to the following settings:

0- Open Edge (Checks for open edges.)

1- Double Face (Checks for faces that share the same 3D space.)

2- Spike (Checks for spikes, which are isolated faces that share only one edge with the object.)

3- Multiple Edge (Checks for faces that share more than one edge.)

4- Everything (Checks for all of the above.)

<STL_Check>.Select_Faces Integer default: 1

These options specify the level of incorrect geometry that's selected, based on the settings for the selection_type value:

0- Don't Select (When on, STL Check doesn't select any part of objects in error.)

1- Select Edges (When on, STL Check marks the edges of faces in error by selecting them. The selection of erroneous edges is visible in viewports.)

2- Select Faces (When on, STL Check marks the faces of any object in error by selecting them. The selection of erroneous faces is visible in viewports.)

<STL_Check>.Check_Now Integer default: 0

Turn on to perform the STL check. For complex objects, expect a pause between the time you turn this on, and the time you see the reported errors in the Status group.

0- Off

1- On

<STL_Check>.Change_MatID Integer default: 1

When on, STL Check also marks faces in error by assigning them a unique material ID.

0- Off

1- On

<STL_Check>.Material_ID Integer default: 2

The material ID that STL Check assigns to faces in error.